120791
21
Zoom out
Zoom in
Previous page
1/23
Next page
13/23
USE OF THE SIDE PLATES
The width of the seat in which the
coffee machine should be inserted is
determined by the thickness of the
cabinet’s sides. To compensate the
different possible measurement, the
appliance is equipped with 6 plates, 4
are 2mm in thickness and 2 are 1mm.
thick. They should be used to
compensate the internal width of the
seat. For obtaining a width of
562/560mm see picture P/1 e P/2.
INSTALLATION WITHOUT
SUPPORT
Put the suitable plates (P/1,P/2)
on the both sides of the
embedding seat, fixing them with
the double-sticker strips (Q/1).
Pay attention to the position of
the bevel which indicates the right
position of the plates.
Release the telescopic runners
and extract the fore part (Q/2)
Fix the telescopic runners’
bearings with the screws as
shown in picture Q/3
Fix the 2 L-flasks as shown in
picture Q/4
Install the cabinet block bar using
the rectangular washers and the
specific screws M4 as shown in
picture Q/5
Install the telescopic runners on
the both sides of the machine as
shown in picture Q/6
Insert the machine: the telescopic
runners should be coupled with
the runners ‘ bearings which are
already fastened in the seat.
(Q/7)
Make runners run until the safety
lock should click.
Adjust the cabinet block bar if
necessary, for the right fastening
of the machine and screw tight
the screws as shown in picture
Q/8
Push the cabinet block button so
that the machine will be well
fastened (F/2).
INSTALLATION WITH SUPPORT
Put the suitable plates (P/1,P/2)
on the both sides of the
embedding seat, fixing them with
the double-sticker strips (R/1)
Pay attention to the position of
the bevel which indicates the right
position of the plates.
Release the telescopic runners
and extract the fore part (R/2)
Fix the telescopic runners’
bearings with the screws as
shown in picture (R/3)
Put the little flask in the right
position and fix it with two self-
threading screws on the base of
the embedding seat as shown in
picture R/4,R/5.
Install the telescopic runners on
the both sides of the machine as
show n in picture R/6
Insert the machine: the telescopic
runners should be coupled with
the runners ‘ bearings which are
already fastened in the seat.
(R/7).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux PE8036-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux PE8036-M in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Electrolux PE8036-M

AEG Electrolux PE8036-M User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info