308950
10
Zoom out
Zoom in
Previous page
1/44
Next page
Setting the time
After the desired language you must set the time before the first wash. Remember to change
the setting time in accordance with daylight-savings time or solar time.
The CLOCK setting permits you to modify/set up the current time. It is important to keep
it updated as the current END Cycle Time depends on it.
To set the time press repeatedly the button 4 to select the settings menu ( SETTINGS ) and
confirm your choice by pressing button 5 .
With a single and short pressing of the button 4 , the hours can be adjusted.
Press the button 5 to confirm it. Repeat the previous operation for setting the minutes.
If the appliance has already been switched on once, refer to the beginning of «Personali-
zation» chapter.
PERSONALIZATION
This appliance is provided with a settings menu that allows you to modify the factory
settings as you want.
When you switch on the machine, by turning the programme selector dial, press the button
4 to activate the options menu. By pressing again the same button you can move through
all the available options till when you locate the settings menu. Press the button 5 to access
in the menu. Use the button 4 again to scroll all the settings and press button 5 to confirm
your choice.
Setting the brightness
The brightness setting ( BRIGHTNESS ) allows you to modify the backlight intensity of the
display.
By pressing the button 4 , you can increase or decrease the brightness.
You can choose between different levels from 0 to 9 (0 = min. - 9 = max.).
Press button 5 to confirm your choice.
Setting the contrast
The contrast setting ( CONTRAST ) allows you to modify the optical characteristic of the
display.
By pressing the button 4 you can increase or decrease the contrast.
You can choose between different levels from 0 to 9 (0 = min. - 9 = max.).
Press button 5 to confirm your choice.
Setting the acoustic signal
The machine is provided with an acoustic device, which sounds in the following cases:
at the end of the programme
in the event of operating problems
If you wish to activate the acoustic device, press the button 4 in order to select the buzzer
menu ( BUZZER ). Press button 5 to confirm your choice. The line around the corresponding
symbol starts blinking in order to indicate that the regulation can be carried out.
Press again the button 4 to activate or deactivate the acoustic signal.
Then press the button 5 to confirm your choice.
10
Personalization
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux ln89680a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux ln89680a in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Electrolux ln89680a

AEG Electrolux ln89680a Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info