EXTRA RINSE
Can be used with all programmes except the wool programme. The
machine performs 4 rinses instead of 3.
This option is recommended for people who are allergic to detergents
and in areas where the water is very soft.
Display
The display shows the following information:
• if the programme selector dial is on the RESET position H, three flashing
dashes appear immediately after pressing the ON/OFF button to indicate
that the machine is ready to receive instructions for the required wash
programme.
• Duration of the selected wash programme, calculated automatically
on the basis of the maximum recommended load for each type of fab-
ric.
• When the programme has finished, a flashing zero is displayed.
• Delayed start, programmed using the special button .
The countdown is updated every hour.
• Incorrect option selection. If an option which is not compatible with
the set wash programme is selected, the message Err is displayed.
• Alarm code indicating a fault in the machine operation (see pages
31...34).
Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme
has finished, the END pilot light comes on.
If the light flashes at the end of the programme
this means that the drain filter is clogged.
The END pilot light flashes in the event of operating problems. At the
same time one of the following lights starts to flash:
= the machine does not fill
= the machine does not empty
= the door has not been closed
To eliminate the problem, see paragraph “Something not working”.
15
Description of the appliance
