364203
31
Zoom out
Zoom in
Previous page
1/54
Next page
English
31
Use
1. Make sure that the appliance is unplugged and
switched o (The control lamps are o.).
2. Take the lid o the deep fryer.
3. Remove the frying basket and ll the container with
oil or grease (maximum 3 l). The lling level must be
located between the minimum and the maximum
level.
4. Insert the plug into a 230 V, 50 Hz power socket. The
red control lamp lights up. Set the desired tempera-
ture by turning the temperature control (2).
5. The green control lamp lights up. Once the set tem-
perature has been reached the green control lamp
goes o. Place the frying basket containing the items
to be fried carefully into the hot fat.
6. The green control lamp switches on and o several
times during frying. This is normal and it indicates
that the temperature is controlled by the thermostat
and is being maintained. Once the frying time is over
(the frying times are to be found on the packaging of
the food or in the recipe), please take out the frying
basket.
7. Let the oil drip from the food being fried.
8. In order to switch o the machine, please turn the
temperature regulator to MIN and remove the plug
from the socket.Wind the mains lead up in the form
of a spiral in the cable compartment.
Cleaning
WARNING:
Always pull out the plug from the mains socket before
cleaning and wait until the unit has cooled down.
CAUTION:
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Under no circumstances should the device be
immersed in water for cleaning.
Wait until the deep fryer is completely cool before clean-
ing. Wait in any case for 1 to 2 hours after use before
using again to avoid burns.
Deep frying fat container
In order to change the oil, pull out the deep frying
fat container and pour the oil out at the side.
Clean the deep frying fat container, the lid and the
housing with a damp clothand household detergent
if necessary. Please do not immerse in water.
The deep frying basket can be cleaned in the usual
way in soapy water.
Housing
Clean the housing after use with a slightly damp cloth.
Changing the Odour and Fat Vapour Filter
The lter in the lid can be replaced.
Unlatch the lter from the inside of the lid by press-
ing in the catches.
Remove the grille.
Replace the lter.
Then reassemble the cover.
NOTE:
When these lters have been used up it is possible to
cut universal lters to size, e.g. from cooker hoods.
Troubleshooting
Device is not working
Troubleshooting:
Check the mains connection.
Check the position of the thermostat.
Other possible causes:
The device is tted with a safety switch (4).
This prevents the heater being switched on accidentally.
Troubleshooting:
Check that the control element is correctly in place.
Overheating Protection
If you should accidentally switch on your deep fat
fryer when there is no oil or fat in it the overheating
protection is automatically turned on. The appliance
is no longer ready to be used. Unplug the deep fryer.
Only after the device has been left to cool down
completely should the „RESTART“ button (5) on the
rear of the control element be operated in order to
use the deep fat fryer again. For this you should use a
plastic or wooden object that is the least 4 cm long.
05-FR 5547 AEG.indd 31 14.07.11 09:28
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux fr 5547 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux fr 5547 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info