Manual Aeg-electrolux FAVORIT 55420 (page 35 of 88) (English, German, Dutch, French)

462989

Zoom out

Zoom in

1/88

SETTING AND STARTING A

PROGRAMME

Setting mode

The appliance must be in setting mode to

accept some operations.

The appliance is in setting mode when,

after the activation:

• All the phase indicators come on.

• The time of the last set programme

flashes in the display.

If the control panel shows other condi-

tions, press and hold Multitab and Delay

at the same time until the appliance is in

setting mode.

Starting a programme without

delay start

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

3. Close the appliance door.

4. Make sure that the appliance is in set-

ting mode.

5. Turn the programme knob until the

marker on the knob is aligned with the

programme you want to set.

• The programme duration flashes in

the display.

• The phase indicators of the set pro-

gramme come on.

6. Press Start. The programme starts.

• Only the indicator of the phase in

operation stays on.

• The display shows the programme

duration that decreases with steps

of 1 minute.

Starting a programme with

delay start

1. Set the programme.

2. Press Delay again and again until the

display shows the delay time you want

to set (from 1 to 24 hours).

• The delay time flashes in the dis-

play.

3. Press Start. The countdown starts.

• The display shows the countdown of

the delay start that decreases with

steps of 1 hour.

• The phase indicators of the set pro-

gramme go off.

• When the countdown is completed, the

programme starts.

– The indicator of the phase in opera-

tion comes on.

Opening the door while the

appliance operates

If you open the door, the appliance stops.

When you close the door, the appliance

continues from the point of interruption.

Cancelling the delay start while

the countdown operates

Press Delay again and again until:

• The display shows the programme du-

ration.

• The phase indicators come on.

• The programme starts.

Cancelling the programme

Press and hold Multitab and Delay at the

same time until:

• The programme duration flashes in the

display.

• The phase indicators come on.

Make sure that there is detergent

in the detergent dispenser before

you start a new programme.

At the end of the programme

When the programme is completed, the

phase indicators are off and the display

shows 0.

1. Open the appliance door.

2. Press the on/off button to deactivate

the appliance.

3. Close the water tap.

If you do not press the on/off but-

ton, the Auto Off device auto-

matically deactivates the appli-

ance after some minutes. This

helps to decrease the energy con-

sumption.

• For better drying results, keep the ap-

pliance door ajar for some minutes.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux FAVORIT 55420 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeg-electrolux FAVORIT 55420 Manual

Product: