Manual AEG Electrolux CS 5200 (page 88 of 484) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

111292

Zoom out

Zoom in

1/484

0 Prepare the solution as indicated on

the packaging of the descaling product

supplied with the coffee maker:.

Pour the contents of the bottle of des-

caler (approx. 0.125 litres) into the

water tank and then add 1 litre water.

Important: Do not under any circum-

stances use any descalers which are not

recommended by Electrolux. If other

descaling agents are used, Electrolux

accepts no liability for any damage.

You can obtain descaling liquid from

specialist retailers or from the Elec-

trolux Service Line.

0 Place a container with a minimum

capacity of 1.5 litres under the milk

frother (Fig. 6).

0 Press and hold the button for at

least 5 seconds. The light

switches on to indicate the start of the

descaling program (the and

lights remain off to indicate that it is

not possible to make coffee).

0 Turn the steam knob half a turn anti-

clockwise (Fig. 8). The descaling solu-

tion will come out of the milk frother

and start to fill the container under-

neath.

0 The descaling program automatically

performs a series of deliveries and

pauses, so as to remove the lime scale

deposits from inside the coffee maker.

0 After around 30 minutes, when the

light comes on, turn the steam knob

half a turn clockwise (Fig. 8) until it

stops.

The machine must be rinsed so as to

eliminate the residues of descaling

solution from inside the machine.

0 Remove the water tank, rinse it and fill

it with clean water.

0 Reposition the tank.

0 Empty the collection container

(located under the milk frother) that is

full of liquid, and then replace it under

the milk frother.

0 Turn the steam knob half a turn anti-

clockwise (Fig. 8). Hot water will come

out of the milk frother and fill the con-

tainer underneath.

0 When the tank is empty, the

light goes off and the light comes

on.

0 Turn the steam knob all the way clock-

wise (Fig. 8) and fill the water tank

with clean water again.

The program of descaling is now termi-

nated and the machine is ready to do

again the coffee.

Note: if the descaling procedure is

stopped before completion, the

alarm is not deactivated and the pro-

cedure must be started again from the

beginning.

Important: the guarantee is not valid

if the above descaling operation is

not performed regularly.

9.5 Setting the water hardness

The light switches on after a

preset period of operation, set in the

factory, considering the maximum

quantity of lime scale that may be

contained in the mains water. If neces-

sary, this period of operation can be

extended, thus making the descaling

operation less frequent, by program-

ming the machine based on the actual

lime content in the water used. You

can use the enclosed test strip to

determine the water hardness, or con-

tact your local water supply company.

Determining water hardness

0 Dip the test strip in cold water for

around 1 second. Shake off the excess

water, and gauge the hardness by

means of the pink bands.

No pink bands or one pink band:

Hardness level 1, soft

up to 1.24 mmol/l, or

up to 7° German hardness, or

up to 12.6° French hardness

Two pink bands:

Hardness level 2, medium hard

up to 2.5 mmol/l, or

up to 14° German hardness, or

up to 25.2° French hardness

822_949_383 ECS5000_5200_Elux.book Seite 88 Donnerstag, 17. Januar 2008 1:58 01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux CS 5200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG Electrolux CS 5200 Manual

Product: