111490
43
Zoom out
Zoom in
Previous page
1/324
Next page
g
43
12 Setting the coffee
temperature
There are three temperature levels to
choose from. The factory setting is
«Temperature high». You can change
this setting as follows:
0 Press the "P" key (Fig. 4).
The symbols "P“ and come on. Fur-
thermore 3 small symbols above the
, and buttons come on to
show the present function of these
buttons, see „Special mode“, page 35.
0 Press the scrolling keys "<" or ">"
(Fig. 5) until the symbol is illumi-
nated.
0 Confirm with the "OK" key (Fig. 5).
The display indicates the current set-
ting. The temperature levels are indi-
cated as follows:
Temperature low
Temperature medium
Temperature high
0 Where necessary, select a different
temperature, using the scrolling keys
"<" or ">" (Fig. 5).
0 When the required temperature is indi-
cated, confirm this with the "OK" key
(Fig. 5). This temperature is now pro-
grammed.
3
To cancel without storing the setting,
press "P“ instead of "OK“.
If "OK" is not pressed, after about
120 sec. the appliance returns auto-
matically to the coffee mode without
storing the setting.
0 To return to the coffee mode, press the
"P" key (Fig. 4) or wait about 120 sec.
for the machine to return automati-
cally to the coffee mode.
13 Cleaning and Care
To ensure consistent coffee quality and
faultless operation, always keep your
coffee machine clean.
13.1 Regular cleaning
1
Caution! Before cleaning, switch off
the coffee machine and allow it to cool
down.
1
Note! Never put the coffee machine or
separate parts of the coffee machine in
the dishwasher. Never immerse the
coffee maker in water.
1
Note! Never put water in the coffee
bean container, as this would damage
the grinder.
1
Do not use any abrasive, scouring or
corrosive cleaning materials. Wipe the
inside and outside of the case only
with a damp cloth.
0 Remove the water tank daily (Fig. 6)
and discard any remaining water. Rinse
out the water tank with fresh water.
Use fresh water every day.
0 Empty the waste coffee container daily
or at the latest when the display
prompts you to do so; see „Emptying
the waste coffee container“, page 44.
0 Regularly drain the drip tray. This can
be done at any time, but must be done
when the red drip tray float (Fig. 28)
appears through the opening in the
drip grid.
0 Regularly (at least once per week)
clean the water tank (N), drip tray (O),
drip grid (A) and waste coffee con-
tainer (Q) with warm water, a mild
washing up liquid and possibly a brush.
0 Each time the machine is used for
frothing, remove the steam nozzle and
clean off any milk residues, see „Clean-
ing the steam nozzle“, page 41.
0 Check that the holes in the coffee dis-
penser are not blocked. To unblock
them, scrape any dry coffee residues
away with a needle (Fig. 29).
822_949_351 CG6200.book Seite 43 Sonntag, 4. März 2007 11:22 23
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux CG 6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux CG 6200 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 14,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info