361847
42
Zoom out
Zoom in
Previous page
1/100
Next page
g
42
14 What do I do, if ...
... coffee-making is interrupted and
the "Fill water tank" indicator (Fig. 3,
k) flashes?
The water tank is empty. Fill the
water tank and press the key or
the key again.
The water tank is not properly
inserted. Check that the water tank
is properly seated.
The coffee is ground too finely.
Clean the coffee-making unit and
adjust the grinding texture.
... the coffee machine does not oper-
ate, and the "Empty grounds con-
tainer" indicator (Fig. 3, j)
flashes?
The coffee grounds container is full.
Empty and thoroughly clean the
grounds container.
... the coffee machine does not oper-
ate, and all 5 indicator lights and
or are flashing?
The coffee-making unit is blocked.
Refer to „Cleaning the Coffee-mak-
ing Unit" Page 39. Completely
remove any encrusted coffee
remains from the coffee-making
unit and reduce the coffee quantity.
The coffee-making unit is overfilled.
Refer to „Cleaning the Coffee-mak-
ing Unit" Page 39. Completely
remove any encrusted coffee
remains from the coffee-making
unit and reduce the amount of
ground coffee spooned in.
If you are unable to remedy the
fault, please contact the AEG Cus-
tomer Service Centre or phone the
Hotline.
... the espresso/coffee is not hot
enough?
Preheat the cups with hot water.
Increase the coffee temperature as
described in this manual
The coffee machine may need des-
caling
... the espresso/coffee is too weak?
Not enough ground coffee. Increase
the amount of ground coffee
The coffee bean container is empty.
Add coffee beans
The coffee quantity is set too low.
Increase the coffee quantity
The grinding texture is set too
coarse. Set the grinding texture to a
finer grade
...milk not frothy enough?
The milk is too hot or too old or the
fat content is too high. Use suitable
milk
Blocked steam nozzle. Clean the
steam nozzle
The air intake in the frothing aid is
blocked. Clean the frothing aid
... the bean container will not locate
on the grinder?
Coffee bean residue on or around
the grinder: Remove coffee bean
residue from the grinder
Coffee bean residue is jammed in the
bean container lock. Clear the bean
container lock of coffee bean resi-
due
... the grinder makes very loud noises
when grinding?
The grinder is blocked by a foreign
body. Remove the foreign bodyas
described in this manual, refer to
„Cleaning the Grinder" Page 38. If
necessary, have the coffee machine
checked by the AEG Customer Ser-
vice Centre.
You can continue to use your coffee
machine with ground coffee.
... the coffee-making unit will not
come out?
The coffee-making unit is not in the
base position.
Leave the coffee machine switched
on, and set the bean container to
"Ground Coffee".
Switch off the coffee machine and
remove the coffee-making unit,
refer to „Cleaning the Coffee-
making Unit" Page 39
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux cf 260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux cf 260 in the language / languages: English, German, Dutch, Portuguese, Spanish as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info