Manual Aeg-electrolux cf 260 (page 38 of 100) (English, German, Dutch, Portuguese, Spanish)

361847

Zoom out

Zoom in

1/100

height adjuster right down, and off the

bottom. To do this, gently raise the

inside catch. Use warm water to clean

any coffee residues from both parts.

Reassemble the two parts. To do this,

gently pull up the catch. Check the

ease of movement of the height

adjuster. Refit the service cover and

push the grounds container back in

place.

13.2 Emptying the Coffee Grounds

Container

At regular intervals, after every 16 cof-

fee brews, the "Empty grounds con-

tainer" indicator (Fig. 3, j) signals

that the container has to be emptied

and cleaned.

0 When the coffee machine is in daily

use, empty the container daily. The

indicator flashes for around 1 minute

each time the machine is switched off,

as a reminder to do this.

Always empty the grounds container

with the coffee machine switched on,

otherwise the coffee machine does not

emptied.

13.3 Cleaning the Grinder

Use the supplied brush to remove

ground coffee residues.

Note! Never put water in the grinder.

This would damage the grinder.

0 Press the "On/Off" key (Fig. 3, h) to

switch off the coffee machine. Unplug

from the mains socket.

0 Turn the bean container so that the

mark is at the "UnlockContainer" posi-

tion and remove the container

(Fig. 23).

0 Remove any remaining coffee beans

(you could use the vacuum cleaner

with the hose or crevice tool attach-

ment for this).

If a foreign body is impossible to

remove, take off the grinding ring.

0 To do this, proceed as follows (Fig. 24):

1. Push the Release catch for removing

grinding ring (Fig. 2, T) forward toward

the centre of the grinder.

2. Keep it in this position and turn the

Lever for setting grinding texture (Fig.

2, U) approximately one full turn

clockwise until it comes up against the

stop.

You can continue to turn the Lever for

setting grinding texture (Fig. 2, U) only

if the Release catch for removing

grinding ring (Fig. 2, T) is pressed.

0 Now release the grinding ring (Fig. 25)

and remove the foreign body or bodies.

Caution! Risk of injury from the spin-

ning grinder. Never switch the coffee

machine on, when you are working on

the grinder. This can lead to severe

injuries. Before starting work, ensure

that the machine is unplugged from

the mains socket.

When refitting the grinding ring,

ensure that both catches on the grind-

ing ring holder engage in the corre-

sponding slots (Fig. 25).

Failure to do this can lead to damage

to the grinder.

0 Turn the Lever for setting grinding tex-

ture (Fig. 2, U) approximately one full

turn anticlockwise until it comes up

against the stop.

0 Set the bean container in place at the

"UnlockContainer" position , and

turn it back to the "Coffee Beans" posi-

tion .

0 Add a small quantity of coffee beans,

and test the proper operation of the

grinder by making a cup of coffee. The

first time the grinder is used, or after

cleaning, less ground coffee will enter

the coffee-making unit, because the

channel first has to be filled. This can

influence the first cup of coffee.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux cf 260 in the language / languages: English, German, Dutch, Portuguese, Spanish as an attachment in your email.

The manual is 4,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeg-electrolux cf 260 Manual

Product: