Manual Aeg-electrolux cf 260 (page 31 of 100) (English, German, Dutch, Portuguese, Spanish)

361847

Zoom out

Zoom in

1/100

0 Fill the water tank with fresh cold

water (Fig. 8).

Pour only fresh cold water in the water

tank. Never put in other liquids, e.g.

mineral water or milk.

0 Replace the water tank (Fig. 7). Press

the tank firmly in, to ensure that the

water-tank valve opens.

If the water tank is not in place when

the coffee machine is switched on, or

the water level is low, the "Fill water

tank" indicator (Fig. 3, k) illumi-

nates. When this indicator is on, coffee

making is not possible or, if started, is

interrupted.

To always be sure of a rich coffee, full

of aroma, you should:

• change the water in the water tank

daily

• wash the water tank at least once per

week in normal washing-up water (not

in the dishwasher). Then flush with

fresh water.

2.3 Switching the Coffee Machine

0 Switch the coffee machine on by

means of the "On/Off" key (Fig. 3, h)

(Fig. 9). The red indicator light

comes on. While the water is being

heated (approx. 25 seconds) the "Cof-

fee machine heating" indicator (Fig. 3,

i) flashes.

0 Once the operating temperature has

been reached, the coffee machine car-

ries out an automatic flushing cycle.

The water flows out into the drip tray.

The "Coffee machine heating" indica-

tor (Fig. 3, i) remains constantly on.

The coffee machine is now ready to

use.

Immediately after being switched on,

during the heating-up phase, the cof-

fee machine runs through a set-up

cycle. The noises this creates are com-

pletely normal.

2.4 Switching the Coffee Machine

Off

If you switch the coffee machine off

with the "On/Off" key (Fig. 3, h)

after you have finished making coffee,

the machine carries out a flush pro-

gram, during which time the "Empty

grounds container" indicator (Fig. 3, j)

flashes for about 1 minute as a

reminder. If you switch the coffee

machine off with the "On/Off" key (Fig.

3, h) while a function is running,

all functions are immediately switched

off.

2.5 Setting the Water Hardness

Before using the machine for the first

time or when using a different water

grade, you should set your coffee

machine to the water hardness level

corresponding to the local water hard-

ness. You can used the included test

card to determine the water hardness,

or contact your local water supply

company.

Determining water hardness

0 Dip the test strip in cold water for

around 1 second. Shake off the excess

water, and gauge the hardness by

means of the pink bands.

No pink bands or one pink band:

Hardness 1, soft

up to 1.24 mmol/l, or

up to 7° German hardness, or

up to 12.6° French hardness

Two pink bands:

Hardness 2, medium hard

up to 2.5 mmol/l, or

up to 14° German hardness, or

up to 25.2° French hardness

Three pink bands:

Hardness 3, hard

up to 3.7 mmol/l, or

up to 21° German hardness, or

up to 37.8° French hardness

Four pink bands:

Hardness 4, very hard

over 3.7 mmol/l or

over 21° German hardness, or

over 37.8° French hardness

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux cf 260 in the language / languages: English, German, Dutch, Portuguese, Spanish as an attachment in your email.

The manual is 4,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeg-electrolux cf 260 Manual

Product: