315584
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
15
* Nur bestimmte Modelle.
33
32
34
35
36
37
38
* Certain models only.
Reinigung des Schlauches und der Düsen
Der Staubsauger stoppt automatisch, wenn die Düse,
das Rohr, der Schlauch, der Filter oder der s-bag®-
Staubbeutel blockiert ist. Ziehen Sie in solchen Fällen
den Netzstecker und lassen Sie den Staubsauger 20 - 30
Minuten abkühlen. Die Blockierung beseitigen und/oder
den Filter und den s-bag®-Staubbeutel ersetzen und
wieder beginnen.
Rohre und Schläuche
32 Die Rohre und Schläuche mit einem
Reinigungsband oder Ähnlichem reinigen.
33* Der Schlauchgriff kann zum Reinigen vom
Schlauch abgenommen werden.
34 Es ist auch möglich, die Blockierung im Schlauch
durch Drücken auf den Schlauch zu beseitigen.
Dabei jedoch vorsichtig sein, falls die Blockierung
durch Glas oder Nadeln im Schlauch verursacht
wurde.
Hinweis: Die Garantie deckt keinerlei durch Reinigung
verursachte Schäden an den Schläuchen ab.
Reinigung der Bodendüse
35 Auf regelmäßige Reinigung der
Kombinationsbodenbürste achten.
36* Radnabe drücken und Räder abziehen.
Staubmäuse, Haare und andere verhedderte
Objekte entfernen.
37* Größere Objekte können nach Abnehmen des
Verbindungsschlauchs von der Düse entfernt
werden.
Reinigung der Turbobürste*
38 Düse vom Staubsaugerrohr entfernen und in
der Düse verwickelte Fäden etc. zum Entfernen
mit einer Schere durchschneiden. Mit dem
Schlauchgriff die Düse reinigen.
Deutsch
Cleaning the hose and nozzle
The vacuum cleaner stops automatically if the nozzle,
tube, hose or filters and s-bag® becomes blocked. In
such cases, disconnect from mains and allow to cool for
20-30 minutes. Clear blockage and/or replace filters and
s-bag® and restart.
Tubes and hoses
32 Use a cleaning strip or similar to clear the tubes
and hose.
33* Hose handle could be dismantled from hose if
cleaning is needed.
34 It may also be possible to remove the obstruction
in the hose by squeezing it. However, be careful in
case the obstruction is caused by glass or needles
caught inside the hose.
Note: The warranty does not cover any damage to the
hose caused by cleaning it.
Cleaning the floor nozzle
35 Be sure to frequently clean the combination floor
nozzle.
36* Press each wheel-hub and draw away the wheels.
Remove dust-balls, hair or other objects that may
be entangled.
37* Larger objects can be accessed by removing the
connection tube from the nozzle.
Cleaning the turbo nozzle*
38 Disconnect the nozzle from the vacuum cleaner
tube and remove entangled threads, etc. by
snipping them away with scissors. Use the hose
handle to clean the nozzle.
English
2191125-10.indd 14 11/5/05 11:20:58 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux avc1120 power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux avc1120 power in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info