72435
66
Zoom out
Zoom in
Previous page
1/84
Next page
88101K
Ceramic glass induction hob
Table de cuisson vetrocéramique à induction
Glaskeramische inductie-kookplaat
Installation and Operating Instructions
Instructions de montage et mode d’emploi
Montage- en gebruiksaanwijzing
2
Dear Customer,
Please read these user instructions carefully and keep them to refer to
later.
Please pass the user instructions on to any future owner of the appli-
ance.
The following symbols are used in the text:
1 Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage to the appliance.
3 Useful tips and hints
2 Environmental information
3
Contents
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the heat setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cookware for induction cooking zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4
Operating Instructions
1 Safety instructions
3
Please comply with these instructions. If you do not, any damage re-
sulting is not covered by the warranty.
5 This appliance conforms with the following EU Directives:
73/23/EEC dated 19.02.1973 Low Voltage Directive
89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
This appliance should be used only for normal domestic cooking and
frying of food.
The appliance must not be used as a work surface or as a storage sur-
face.
Additions or modifications to the appliance are not permitted.
Children’s safety
Small children must be kept away from the appliance.
Only let bigger children work on the appliance under supervision.
General safety
The appliance may only be installed and connected by trained, regis-
tered service engineers.
Built-in appliances may only be used after they have built in to suita-
ble built-in units and work surfaces that meet standards.
In the event of faults with the appliance or damage to the glass ce-
ramic (cracks, scratches or splits), the appliance must be switched off
and disconnected from the electrical supply, to prevent the possibility
of an electric shock.
Repairs to the appliance must only be carried out by trained regis-
tered service engineers.
5
Safety during use
Remove stickers and film from the glass ceramic.
There is the risk of burns from the appliance if used carelessly.
Cables from electrical appliances must not touch the hot surface of
the appliance or hot cookware.
Overheated fats and oils can ignite quickly. When cooking with fat or
oil (e.g. chips) do not leave the appliance unattended.
Switch the cooking zones off after each use.
Users with implanted pacemakers should keep their upper body at
least 30 cm from induction cooking zones that are switched on.
Safety when cleaning
For cleaning, the appliance must be switched off and cooled down.
For safety reasons, the cleaning of the appliance with steam jet or
high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
The glass ceramic can be damaged by objects falling onto it.
The edge of the glass ceramic can be damaged by being knocked by
the cookware.
Cookware made of cast iron, cast aluminium or with damaged bot-
toms can scratch the glass ceramic if pushed across the surface.
Objects that melt and things that boil over can burn onto the glass
ceramic and should be removed straightaway.
Do not use the cooking zones with empty cookware or without cook-
ware.
The ventilation gap of 5mm between the worktop and front of the
unit underneath it must not be covered.
6
Description of the Appliance
Cooking surface layout
Control panel layout
Induction cooking zone 1800 W
with power function 2300 W
I
n
d
uct
i
on coo
ki
ng zone 2400
W
with power function 3200W
I
n
d
uct
i
on coo
ki
ng zone 1800
W
with power function 2300 W
Induction cooking zone 1200W
with power function 1500 W
Control
panel
On/Off
with power indicator
Heat setting selection
Lock
Timer display
Display
Cooking zone indicators
Timer function
Power function
STOP+GO
Timer
7
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions
are controlled by touching sensor fields and confirmed by displays and
acoustic signals.
Touch the sensor fields from above, without covering other sensor
fields.
Sensor field Function
On / Off To switch the appliance on and
off
Increase settings Increasing heat setting/time
Decrease settings Decreasing heat setting/time
TIMER Timer Timer selection
Lock Locking/unlocking the control
panel
Power Switching the power function on
and off
Stop+Go To switch the Keep Warm setting
on/off
8
Displays
Residual heat indicator
1 Warning! Risk of burns from residual heat. After being switched off,
the cooking zones need some time to cool down. Look at the residual
heat indicator
h .
3 Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking di-
rectly in the base of the cookware. The glass ceramic is merely heated
by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temper-
ature of the electronics.
Display Description
¾ Cooking zone is switched off
u Keep warm setting Keep warm setting/STOP+GO
function is set
¿ - Ç Heat settings Heat setting is set
2 - 6 Heating setting plus
decimal point
Intermediate heat setting is set
a Automatic warm up
function
Automatic warm-up function is
activated
e Fault Malfunction has occurred
f Pan detection Cookware is unsuitable or too
small or no cookware has been
placed on the cooking zone
h Residual heat Cooking zone is still hot
l Child safety device Lock/child safety device is en-
gaged
p Power Power function is switched on
_ Safety cut-out Safety cut-out has been activated
9
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
3 After switching on, within approx. 10 seconds a heat setting or a func-
tion must be set, otherwise the appliance automatically switches itself
off.
Setting the heat setting
Control panel Display Pilot light
Switch on Touch for 2 seconds ¾ lights up
Switch off Touch for 1 second h / none goes out
Control panel Display
Increase Touch u to Ç / p
Decrease Touch Ç to ¾
Switch off Touch and at the same time ¾
10
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
3 Timer functions are not stopped by STOP+GO.
3 STOP+GO locks the whole control panel except the sensor field .
Using the automatic warm-up function
All cooking zones are equpped with an automatic warm up function
When setting a heat setting using , when starting from
¾, the cook-
ing zone switches to full power for a certain amount of time and then
automatically switches back to the heat setting set.
3 If during the automatic warm up a a higher heat setting is selected,
e.g. from
Á to Ã, the automatic warm up is adjusted.
3 If there is still residual heat on the cooking zone (display h), the auto-
matic warm up is not performed.
Control panel Display
To switch
on
Touch STOP+GO u
To switch
off
Touch STOP+GO heat setting that was previ-
ously set (not automatic
warm up function)
Control
panel
possible
heat set-
tings
Display
Switch on
(only when starting at
¾)
Touch ¿ to Æ a (after 5 sec-
onds)
Switch off Touch Æ to ¿ / u Æ to u
Not used Touch Ç to u Ç to u
11
The length of time that the automatic warm up function operates de-
pends on the heat setting selected.
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can
be locked at any time in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
3 When you switch the appliance off, the locking function is automati-
cally switched off.
Heat
setting
Length of the
automatic warm
up [min.]
Interme-
diate
heat set-
ting
Length of the
automatic warm
up [min.]
v 0
1 1
2 1.7 2. 3
3 4.8 3. 5.5
4 6.5 4. 8.2
5 10.2 5. 12.3
6 2 6. 2.5
7 3.5
8 4.5
9 ---
Control panel Display
Switch on Touch l (for 5 seconds)
Switch off Touch previously set heat setting
12
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Setting the child safety device
Releasing the child safety device
Overriding the child safety device
The child safety device can be released in this way for a single cooking
session; it remains activated afterwards.
Step Control panel Display/Signal
1. Switch on the appliance
(Do not set a heat setting)
¾
2. Touch until the signal sounds Acoustic signal
3. Touch l
Appliance switches off.
Step Control panel Display/Signal
1. Switch on the appliance l
2. Touch until the signal sounds Acoustic signal
3. Touch
Appliance switches off.
Step Control panel Display/Signal
1. Switch on the appliance l
2. Touch and at the same time ¾ / acoustic signal
Until the appliance is next switched off, it can used as normal.
13
Switching the power function on and off
The power function makes more power available to the cooking
zones, e.g. to bring a large quantity of water to the boil quickly.
The power function is activated for 10 minutes. After that the cooking
zone automatically switches back to heat setting 9.
Power Management
The cooking zones have a maximum
power available to them.
If this power range is exceeded by
switching on the power function,
Power Management reduces the
heat setting of another cooking
zone.
The display for this cooking zone al-
ternates for two minutes between
the set heat setting and the maxi-
mum possible heat setting. Thereaf-
ter the actual heat setting is
displayed.
Example:
3 If the power function has ended, the cooking zones automatically
switch back to the heat setting set previously.
Control panel Display
Switch on Touch p
Switch off Touch Ç
Touch Ç
Last
cooking zone
switched on
Other cooking zone
set
heat setting
set
heat set-
ting
display actual
heat setting
p 9 6 alternating with 9 6
14
Using the timer
All cooking zones can use each use one of the two timer functions at
the same time.
3 If a cooking zone is switched off, the timer function set is also switched
off.
3 If a heat setting is set on this cooking zone in addition to a countdown
timer, the cooking zone is switched off after the time set has elapsed.
Selecting a cooking zone
3 If the pilot light is flashing more slowly, the heat setting can be set or
modified.
Function Condition Outcome after the
time has elapsed
Safety cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone
switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes
Step Control panel Display
1. Touch TIMER once Pilot light of the first
cooking zone flashes
2. º Touch TIMER once Pilot light of the second
cooking zone flashes
3. Touch TIMER once Pilot light of the third
cooking zone flashes
4. Touch TIMER once Pilot light of the fourth
cooking zone flashes
15
3 If other timer functions are set, after a few seconds the shortest re-
maining time of all the timer functions is displayed and the corre-
sponding pilot light flashes.
Setting the time
Switching off the timer function
Step Control panel field Display
1. TIMER Select cook-
ing zone
Pilot light of the cooking zone select-
ed flashes
2. Touch or for
the cooking zone se-
lected
00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Step Control panel field Display
1. TIMER Select cook-
ing zone
Pilot light of the cooking zone select-
ed flashes faster
The time remaining is displayed
2. Touch for the
cooking zone select-
ed
The time remaining counts down to
00.
The pilot light goes out.
The timer function for the selected cooking zone is switched off.
16
Changing the time
Displaying the time remaining for a cooking zone
Switching off the acoustic signal
Step Control panel field Display
1. TIMER Select cook-
ing zone
Pilot light of the cooking zone select-
ed flashes faster
The time remaining is displayed
2. Touch or for
the cooking zone se-
lected
01 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Step Control panel field Display
1. TIMER Select cooking
zone
Pilot light of the cooking zone select-
ed flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Step Control panel field Acoustic signal
1. Touch TIMER Acoustic signal to acknowledge.
Acoustic signal stops.
17
Safety cut-out
Cooking surface
If after switching on the cooking surface, a heat setting is not set for
a cooking zone within approx. 10 seconds, the cooking surface auto-
matically switches itself off.
If one or more sensor fields are covered for longer than approx. 10
seconds, e.g. by a pan placed upon it, a signal sounds and the cooking
surface switches off automatically.
If all cooking zones are switched off, the cooking surface automati-
cally switches itself off after approx. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel
immediately switches all cooking zones off.
Cooking zones
In the event of overheating (e.g. when a pan boils dry) the cooking
zone automatically switches itself off. _ is displayed. Before being
used again, the cooking zone must be set to 0 and allowed to cool
down.
If cookware that is not suitable is used, f flashes in the display and
after 10 minutes the display for the cooking zone switches itself off.
If one of the cooking zones is not switched off after a certain time, or
if the heat setting is not modified, the relevant cooking zone switches
off automatically.
Heat setting Switches off after
v, 1 -2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
18
Tips on Cooking and Frying
3
Information on acrylamides
According to the latest scientific knowledge, intensive browning of
food, especially in products containing starch, can constitute a health
risk due to acrylamides. Therefore we recommend cooking at the lowest
possible temperatures and not browning foods too much.
Cookware for induction cooking zones
3 Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Test of suitability
Cookware is suitable for induction, if …
... a little water is heated on an induction cooking zone set to heat
setting 9 within a few seconds.
... a magnet sticks to the bottom of the cookware.
3 Certain cookware can make noises when being used on induction cook-
ing zones. These noises are not a fault in the appliance and do not af-
fect operation in any way.
Pan size
Induction cooking zones adapt automatically to the size of the cook-
ware bottom up to a certain limit. However the magnetic part of the
cookware bottom must have a minimum diameter depending upon the
size of the cooking zone.
3 On the 270 mm cooking zone, the minimum pan base diameter of 180
mm is marked by the inner circle.
3 The cookware must be placed centrally on the cooking zone.
Cookware made of suitable
Steel, enamelled steel yes
Cast iron yes
Stainless steel if appropriately labelled by the manufacturer
Aluminium, copper, brass ---
Glass, ceramic, porcelain ---
19
Tips on energy saving
2 Place cookware on the cooking zone before it is switched on.
2 If possible, always place a lid on the cookware.
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
set-
ting
Cooking-
process
suitable for
Cooking
time
Tips/Hints
0 Off position
u
Keeping
food
warm
Keeping cooked foods
warm
as required Cover
1-2
Melting
Hollandaise sauce,
melting butter, chocolate,
gelatine
5-25 mins. Stir occasionally
Solidi-
fying
Fluffy omelettes, baked
eggs
10-40 mins. Cook with lid on
2-3
Simmer-
ing on
low heat
Simmering rice and milk-
based dishes
Heating up ready-cooked
meals
25-50 mins.
Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
3-4
Steaming
Braising
Steaming vegetables, fish
braising meat
20-45 mins.
With vegetables add
only a little liquid (a
few tablespoons)
4-5 Boiling
Steaming potatoes 20-60 mins.
Use only a little liquid,
e. g.: max.
¼ l water
for 750 g potatoes
Cooking larger quantities
of food, stews and soups
60-150
mins.
Up to 3 l liquid plus in-
gredients
6-7
Gentle
Frying
Frying escalopes, veal
cordon bleu, cutlets, ris-
soles, sausages, liver, roux,
eggs, pancakes, dough-
nuts
Steady
frying
Turn halfway through
cooking
21
Cleaning and Care
1
Take care! Risk of burns from residual heat.
Let the appliance cool down.
1 Warning! Sharp objects and abrasive cleaning materials will damage
the appliance. Clean with water and washing up liquid.
1 Warning! Residues from cleaning agents will damage the appliance.
Remove residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops
3 Remove stubborn residues with a cleaner for glass ceramic or stainless
steel.
3 Scratches or dark stains on the glass ceramic that cannot be removed
do not however affect the functioning of the appliance.
Remove
Type of dirt
imme-
diately
when the appliance has
cooled down
using
sugar, food containing sugar yes ---
a scraper*
plastics, tin foil yes ---
limescale and water rings --- yes
cleaner for glass ce-
ramic or stainless
steel*
fat splashes --- yes
shiny metallic discolorations --- yes
22
What to do if
Problem Possible cause Remedy
The cooking zones will not
switch on or are not func-
tioning
More than 10 seconds have
passed since the appliance
was switched on
Switch the appliance on
again.
The lock is switched on l Switch off the lock (See
the section “Locking/un-
locking the control panel”)
The child safety device is
switched on
l
Deactivate the child safety
device (See the section
“Child safety device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
The sensor fields are partly
covered by a damp cloth or
with liquid
Remove the cloth or the
liquid.
Switch the appliance on
again.
Safety cut-out has been
triggered
Switch the appliance on
again
STOP+GO is activated Switching off STOP+GO
The residual heat indicator
is not displaying anything
The cooking zone was only
on for a short time and is
therefore not hot
If the cooking zone is sup-
posed to be hot, call the
Customer Service Depart-
ment.
The automatic warm up
function is not switching
itself on
There is still residual heat
on the cooking zone h
Let the cooking zone cool
down
The highest heat setting is
set Ç
The highest heat setting
has the same power as the
automatic warm up func-
tion
The heat setting was set
using the sensor field
1. Switching off the cook-
ing zone
2. Set the cooking zone us-
ing the sensor field
Repeated acoustic signal
(6x), appliance switches off
One or more sensor fields
have been covered for
longer than 10 seconds
Uncover sensor field
Display is switching be-
tween two heat settings
Power management is re-
ducing the power of this
cooking zone
See the section “Switching
the power function on and
off”
24
Disposal
2
Packaging material
The packaging materials are environmentally friendly and can be recy-
cled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at the community waste disposal facilities.
2 Old appliance
Please dispose of your old appliance in line with the guidelines for dis-
posal in your community.
27
Service
In the “What to do if …” section a number of malfunctions are listed
that you can rectify yourself Look there first if a fault occurs.
Is it a technical fault?
If so, please contact your customer service centre. (You will find ad-
dresses and telephone numbers in the section “Customer Service Cen-
tres”.)
Always prepare in advance for the discussion. This will make diagnosis
of the problem easier and also make it easier to decide if a customer
service visit is necessary:
Please make a note of the following information as accurately as possi-
ble:
What form does the fault take?
Under what circumstances does the fault occur?
Prior to the telephone call it is im-
portant that you make a note of the
following appliance code numbers
that are given on the rating plate:
model description,
PNC code (9 digits),
S No code (8 digits).
We recommend that you record the
code numbers here so that you al-
ways have them to hand:
When do you incur costs even during the warranty period?
if you could have remedied the fault yourself using the fault table
(see section “What to do if …”),
if the customer service technician has to make several journeys be-
cause he was not provided with all the relevant information before
his visit and therefore, forexample, has to fetch spare parts. These
multiple trips can be avoided if you prepare your phone call as de-
scribed above.
Model: . . . . . . . . . . .
PNC: . . . . . . . . . . .
S-No: . . . . . . . . . . .
28
Chère cliente, cher client,
Veuillez lire attentivement la notice d’utilisation dans son intéralité et
la conserver pour pouvoir le consulter ultérieurement.
Veuillez la transmettre à l’éventuel propriétaire ultérieur de l’appareil.
Les symboles suivants sont utilisés dans ce document :
1 Consignes de sécurité
Avertissement : conseils pour votre sécurité personnelle.
Avertissement ! Pour éviter d'endommager l'appareil
3 Conseils généraux et pratiques
2 Informations environnementales
29
Sommaire
Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Description de l'appareil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Equipement du plan de cuisson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Bandeau de commande. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Touche sensitive “Touch Control” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Voyants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Indicateur de chaleur résiduelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Utilisation de l’appareil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Mettre l’appareil sous/hors tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Sélectionner le niveau de cuisson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Activer et désactiver la fonction de maintien au chaud . . . . . . . . . . . . . . . . 36
Utilisation de la commande de démarrage automatique de la cuisson . . . . 36
Verrouiller/déverrouiller le bandeau de commande . . . . . . . . . . . . . . . . . . . . 38
Utilisation de la sécurité enfants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Activer/désactiver la fonction Puissance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Utilisation du minuteur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Désactivation de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Conseils de cuisson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Plats pour cuisson sur zones de cuisson à induction . . . . . . . . . . . . . . . . . . . 45
Conseils d’économie d’energie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Exemples d’utilisation pour la cuisson. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Nettoyage et entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Que faire si … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Protection de l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Instructions d'installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Service après-vente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
33
Touche sensitive “Touch Control”
Les touches sensitives Touch Control permettent de commander l’appa-
reil. Une pression sur les touches sensitives permet d’activer les fonc-
tions et le fonctionnement de ces dernières est confirmé par des
voyants ou par des signaux sonores.
Appuyez sur les touches sensitives par un mouvement de haut en bas,
en évitant de recouvrir les autres touches.
Touche sensitive Fonction
Marche / Arrêt Mettre l’appareil sous/hors ten-
sion
Augmenter les réglages Augmenter la durée /le niveau de
cuisson
Réduire les réglages Réduire la durée /le niveau de
cuisson
TIMER Minuteur Sélection du Minuteur
Verrouillage Verrouillage/déverrouillage du
bandeau de commande
Puissance Activation/désactivation de la
fonction Puissance
Stop+Go Activer/désactiver la fonction de
maintien au chaud
66
Kinderbeveiliging gebruiken
De kinderbeveiliging voorkomt ongewenst gebruik van het apparaat.
Kinderbeveiliging inschakelen
Kinderbeveiliging uitschakelen
Kinderbeveiliging tijdelijk uitschakelen
De kinderbeveiliging kan op deze manier eenmalig worden uitgescha-
keld; bij het volgende gebruik is de kinderbeveiliging weer actief.
Stap Bedieningsveld Indicatie/signaal
1. apparaat inschakelen
(geen kookstand instellen)
¾
2. aanraken tot het signaal
klinkt
akoestisch signaal
3. aanraken l
Apparaat wordt uitgeschakeld.
Stap Bedieningsveld Indicatie/signaal
1. apparaat inschakelen l
2. aanraken tot het signaal
klinkt
akoestisch signaal
3. aanraken
Apparaat wordt uitgeschakeld.
Stap Bedieningsveld Indicatie/signaal
1. apparaat inschakelen l
2. en tegelijk aanraken ¾ / akoestisch signaal
Tot de volgende keer dat het apparaat wordt uitgeschakeld, kan dit
normaal worden gebruikt.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux 88101 KFN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux 88101 KFN in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info