371203
59
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISH
59
If problems occur during operation of the DVD player,
you can use one of the following methods to correct
them.
Problem
Possible fault correction
No power
1. Check whether the mains plug is correctly inserted in
the socket.
No sound
1. Check the connection between the DVD player and
television set and each other connected device.
2. Check whether the correct mode is set for the televi-
sion and amplifi er.
Surround loudspeakers are distorted.
Check the medium. In the case of VCDs and S-VCDs it
is possible that the coding of the background signals is
faulty, depending on the application of the user software.
Radio operation: RDS display appears and disappears
Under critical reception conditions the RDS display
changes with the frequency display. This is not a fault.
No picture
1. Check the connection between the DVD player and
television set and each other connected device.
2. Check whether the television set is switched on.
3. Press the N/P button repeatedly until you see a
picture again.
4. If you have selected P-SCAN and your receiving
device does not have Progressive Scan, switch the
DVD player off and on again after a few seconds.
Then press the N/P button several times until you see
a picture again.
Disc playback does not work
1. Check whether the disc has been inserted in the
drawer with the marked side facing upwards.
2. Check whether the disc is clean. It must not be cove-
red with dust, particles of dirt or fi ngerprints.
3. Check whether the disc is placed correctly in the
drawer.
4. Check whether the parental lock function is switched
on.
5. Check whether the disc is designated for use in your
region.
Remote control does not work
1. Check the batteries and replace them if necessary.
2. Check whether any objects are located between the
remote sensor located on the front of the device and
the remote control.
3. The remote control must be pointed in the direction
of the sensor on the device.
Picture interference
1. Check whether the disc is clean and free of scrat-
ches.
No colour picture
1. Check whether the S connection is damaged (pin
bent).
MP3 disc is not played back
1. Use different software to burn the disc as it is pos-
sible that the software version used is not compatible
with the DVD player.
2. Use a later software version, for example Audiostati-
on 4, Easy CD Creator, Toast Titanium, etc.
3. Ensure that the MP3 fi le has not been coded with a
variable bit rate (e.g. from Real Networks).
Note:
The playback of CDs and DVDs produced by the user
cannot be guaranteed due to the large number of soft-
ware versions and CD/DVD media available.
TROUBLESHOOTING
5....-05-DVD4606_GB 59 09.07.2004, 10:03:27 Uhr
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG dvd 4606 hc at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG dvd 4606 hc in the language / languages: English, German as an attachment in your email.

The manual is 10,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info