551743
42
Zoom out
Zoom in
Previous page
1/48
Next page
42
To clear 6-digit password if you forget your password,
follow the procedure below.
1. At the change page enter 6-digit number “136900”
(SUPERUSER PASSWORD) and then press
ENTER.
2. Enter a new password.
Last Memory
Press and to select LAST MEMORY.
Press
or to select ON or OFF, then press ENTER.
Default
To restore the original settings of the player, follow the
steps below.
Press
and to select DEFAULT.
RESET will be highlighted. Press ENTER.
The original settings of the player will be restored.
Troubleshooting
Before calling customer service if you have problems with
this device, please search for the possible fault in the
table below. With a few simple tests or minor adjustments
you may be able to rectify the problem so that the device
functions correctly again.
Symptom (frequent) Remedy
No power insert the mains plug into the socket.
No playback Condensation has formed: wait
even if PLAY is approx. 1 to 2 hours until the device
pressed. has dried out.
• Playback begins The device can only play back the
but stops again following media: DVDs, video CDs,
immediately. CDs, MP3s and JPEGs.
The disc may be dirty and require
cleaning.
Ensure that the disc has been
inserted with the label facing
upwards.
No picture. Ensure that the device is properly
connected.
Ensure that the television is turned
to “video”
Please press the VIDEO button until
you have a picture again.
No sound. Ensure that the device is properly
connected.
• Distorted sound. Ensure that the television and
stereo system have been adjusted
correctly.
Adjust the main volume via the
remote control.
The picture is In this case the picture is sometimes
distorted during a little distorted – this is normal.
fast forward or
fast rewind.
No fast forward Some discs have sectors which do not
(or fast rewind) allow fast forward (or reverse)
playback. playback.
No 4:3 (16:9) Select the correct setting correspon-
picture. ding to the characteristics of you
television (“TV Aspects”)
No Surround Select the correct setting under “Audio
Sound Output” corresponding to you stereo
system.
No operation Check whether the batteries have
possible via the been inserted with the correct
remote control. polarity (+ and –).
The batteries are flat and must be
replaced.
Point the remote control in the
direction of the sensor on the
device.
Do not use the remote control at a
distance of more than 5 metres
from the sensor.
The remote control is adjusted to
the other key surface. Please press
the SHIFT button to change the key
surface.
English.p65 9/5/05, 11:10 AM42
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DVD 4511 CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DVD 4511 CR in the language / languages: English, German as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info