21474

AEG DSE260 Manual

5
Zoom out
Zoom in
Previous page
1/46
Next page
ENGLISH 6 DSE 220, DSE 260
To remove the base plate depress the locking
button and remove the base plate from the recep-
tion by turning it.
To mounting/remove the lamella base plate
proceed analogously.
Should the Velcro coat at the top of the base plate
be worn after longer use, the base plate can be
turned 120° and be re-mounted. This ensures a
perfect fit of the sanding paper at the top.
Fitting the
sandpaper
Always disconnect the plug from the socket before carrying out any work on the
machine.
Simply press the required sandpaper to the Velcro faced base plate. To remove, pull
it off. The holes in the sandpaper must conform with the holes in the base plate.
Dust extraction When producing large quantities of dust, a suction hose (35 mm diameter) can be
connected via the provided adapter. The suction hose can be connected with an
AEG wet-and-dry vacuum cleaner. We recommend the use of the AEG wet-and-dry
vacuum cleaner NTE 1100. It enables connecting the tool directly to the socket of
the vacuum cleaner. When switching on the tool, the vacuum cleaner switches on
automatically.
Connecting the
dust-remover
Insert the suction hose connector into the adapter until it sits firmly. Connect the
other end of the suction hose to a vacuum cleaner which is suited for dust extraction.
Advices for
operation
■ Always start sanding with coarse sanding paper. Then use finer paper until reaching
the required smoothness of the surface.
■ Always switch on the machine before starting to sand. Remove the tool from the
workpiece before switching it off. The workpiece could be scratched if the machine
is not removed from the workpiece before running out.
■ Smoothly lead the machine over the workpiece applying light pressure. Applying too
much pressure reduces the stroke rate and therefore the sanding performance!
■ Sand larger surfaces in widths. Let the widths overlay slightly.
Optimum speed
of rotation
The optimum speed of rotation also depends on the hardness of the material to be
worked as well as the quality and the graining of the used sandpaper:
Service Keep the machine and the ventilation slots clean.
Only use AEG accessories and spare parts. The exchange of components not
described must be carried out from an Atlas Copco service agent (refer to the leaflet
guarantee/service agents).
If needed, an exploded view of the tool can be ordered. Please state the ten-digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at:
Atlas Copco Electric Tools GmbH, Postfach 320, D-71361 Winnenden.
Accessories Please refer to page 2 for range of accessories. Further accessories with part
numbers are shown in our catalogues.
1
2
Usage Graining Electronics
Sanding body-work damage 180…400 3…5
Grinding off old varnish 60… 80 4…5
Sanding varnished surfaces 120…400 2…4
Sanding natural wood 60…240 2…5
Rough sanding glass fibre reinforced plastics 60… 80 2…5
Fine sanding glass fibre reinforced plastics 180…400 2…5
De-rusting steel 60…120 2…4
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DSE260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DSE260 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info