648364
30
Zoom out
Zoom in
Previous page
1/64
Next page
OPERATING INSTRUCTIONS
Using the product
30
Weekly consumption
This function makes it possible to view the power
the radiator has consumed over the previous 7 days.
If the consumption indication is flashing, this means
that the data saved relates to a period of less than
7 days.
Please note: The display shows the estimated
consumption, which may differ from that measured
by specific meters, suitable for the purpose.
Displaying the ambient temperature
The display shows the ambient temperature measu-
red by the radiator.
Alignment of the ambient temperature
This function is used to edit the ambient temperature
measured by the radiator and used to manage hea-
ting power, if it needs to be corrected to compensate
for reading errors due to things like being near to
heat sources, or cold air draughts.
The display flashes the correction value to be applied.
To edit it, push the “+” or “-“ keys.
If, for example, the temperature set on the radiator
is 19,2°C and the ambient temperature is measured
at 19,5°C, align it by +0,3°C.
Always wait at least 4 hours for the temperature to
settle, before doing any alignment.
Remote control
This function allows the radiator to be controlled
using external timers, piloted sockets with telephonic
control, and similar devices.
For further details see paragraph 6.3.3.
Switching the function (ON) or (OFF) is done by pus-
hing the “+” or “-“ keys respectively.
Warning: Activation is NOT indicated by any icon on
the display.
6.3.1 Presence sensor
This function allows the radiator to pick up whether or not people are in the space, and automatically regulate the heating level, in
order to optimise comfort and energy saving.
Thanks to this function, which can only be activated in Comfort mode, the radiator continuously monitors the room and, if no people
are detected, it reduces the comfort temperature set as follows:
Period of absence Reduction of the Comfort temperature Indication on the display
60min 1,0°C The presence sensor and comfort mode
symbols flash together
90min 2,0°C
120min 3,5°C
38hours Anti-freeze activated 7±3°C
The reduction of temperature always relates to the comfort temperature. If the radiator is in Eco or Anti-freeze mode, no change in
temperature to be maintained in the room will be observed.
Should someone be detected in the room for at least 10 consecutive minutes, the temperature is automatically returned to the comfort
temperature set, without any reduction. The same happens if, while the temperature required is being reduced, due to an absence of
people being detected in the room, the „M“ key is pushed.
Important: Correct operation of this function may depend on where the radiator is positioned in the room. To choose the best installation
position, bear in mind that the sensor detects movements within the area indicated in figure 9, and that no objects must be in its way.
Presence detection is also more effective when people move in front of the sensor that when they move towards it.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DKE 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DKE 200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info