648364
27
Zoom out
Zoom in
Previous page
1/64
Next page
OPERATING INSTRUCTIONS
Using the product
27
ENGLISH
Press “+” button to enter the first hour to see/modify. Press “M” button to choose the wished temperature
level among Comfort, Eco or Frost Free:
The displayed temperature once you’ve selected a
specific hour of the day, is the one currently set on
the P1 Program.
Use “+” and “-“ buttons to enter each hour of day
1 and see/modify the working temperature of each
of them.
The hour displayed always indicates the starting
point. For example: when H 23 is displayed the mo-
dification involves the period of time between 23:00
and 00:00.
Having modified the temperature for each of the 23
hours of Day 1, press further “+” button to enter the
modification mode of Day 2.
Press “+” button to diplay/modify the working tem-
perature of each hour of Day 2, as descrive for Day 1.
You can set automatically the same program of Day
1 on Day 2 by holding the “F” button and pressing
+” button.
Note: you are allowed to copy and paste the same
daily program ONLY WHEN the number of the day you
wish to adjust is displayed (as showed in the picture),
BUT NOT when the hour is displayed.
Once the last day (Day 7) has been set, press “+
button to end the program sequence.
END will appear on the display. A further pression
of “+” button will allow you to confirm the adjusted
program.
“OK“ will appear on the display for 5 second, confir-
ming that the Program sequence has been carried
out successfully.
System is now set to adjust the temperature according
to the new adjustment of program P1.
Note: it is possible to exit any time from the program
sequence, without displaying every hour until Day 7.
To do so, just hold “F” button and press “-“ button.
N.B.:
- You can abort the display/modification sequence anytime, deleting any settings that have not been saved, just by pressing
“Stand-By” button;
- Restoring the default settings will delete every P1 Program previously created (see paragraph 6.3);
- If no button is pressed within 90 sec. during the Program setting process, the result will be the cancellation of the display/modi-
fication procedure and will restore back the factory default settings;
- During the programmation process, the heating elements will automatically switch to Stand-by mode, and the radiator does not
heat.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DKE 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DKE 200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info