648363

AEG DKE 150 Manual

22
Zoom out
Zoom in
Previous page
1/64
Next page
OPERATING INSTRUCTIONS
Your product
22
2. Your product
Other than the heater you have chosen the package includes (picture 1):
- 1x metal brackets for wall mounting (fixed to the radiator);
- 4x nylon plug expansion 8x50mm;
- 4x 5x60mm cross head screws to fix wall brackets;
Refer to your dealer if something is broken or missing.
3. Safe positioning
- Only use the product in its horizontal position;
- This product is fitted with a double electrical insulation circuit (class II) and therefore does not require an earth connection;
- Always make observe the minimum distances from walls, furniture and/or objects, as indicated in picture 2.
- Never install the product on a surface made from wood or synthetic material.
- This product is water resistant to IP24. It may therefore be used in bathrooms or other areas subject to humidity provided it is
never installed within the perimeter of bathtubs or showers (Volume 1 of figure 2).
- Do not install the radiator in a draft that could disturb its regulation.
4. Installation
Remove the wall-mounting bracket fixed to the back of the radiator, by releasing first the 2 upper springs and then the 2 lower
springs as shown in figure 4.
Rest the bracket on the floor to use it as a template to mark the points at which the two lower fixing holes are to be made (figure
5A).
Lift the bracket until its lower fixing points coincide with the marks made on the wall before, and use a pencil to mark the position
of the two upper fixing points (figure 5B).
Drill the 4 holes at the points marked previously, and insert the plastic plugs (figure 6).
Fix the bracket to the wall using the 4 screws supplied (figure 7).
Hook the radiator to the bracket starting with the 2 lower fixing points, and then click the 2 upper fixing points into position (figu-
re 8).
Should you have to remove the radiator from the bracket at a later stage, we recommend releasing the lower two fixing points
first and then the upper fixings.
5. Electrical connections
- The product must be powered at a voltage of 230V AC 50Hz.
- The product must be supplied with a cable and plug. If a product with plug is installed in France, connect it to the mains power
supply by cutting off the plug and using a suitable connection box.
- In bathrooms, kitchens or other humid areas, install the connection terminal at least 25cm off the floor.
- The electrical connection to the mains power supply must also include a 2-pole switch with a minimum contact aperture of 3mm.
As a priority, always abide by your national wiring rules.
- If the product is powered through a 30mA differential switch, make sure the pilot wire is also controlled by the differential switch.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DKE 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DKE 150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info