697945
6
Zoom out
Zoom in
Previous page
1/192
Next page
www.aeg.com
6
5. CONTROLS
The hood is tted with a control panel with
aspiration speed selection control and a
light switch to control cooking area lights.
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood suction
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking
and for another 15 minutes approximately
after terminating cooking.
The control switches are located on the
unit’s front panel:
T6
T2
T6
T3
T6
T4
T6
T5
T6
T6
T6
T7
T6
T8
T6
T9
T6
T10
T6
T11
1 Speed ON/OFF button
Control panel on/off key
2 Suction speed (power) key 1
3 Suction speed (power) key 2
4 Suction speed (power) key 3
5 Suction speed (power) key 4
Note: suction speed (power) key 4 has
a limited duration of 10 minutes, after
which the previous suction speed is
reactivated.
6 Suction speed (power) key 5
Note: suction speed (power) key 5 has
a limited duration of 5 minutes, after
which the previous suction speed is
reactivated.
7 "Breeze” function key
(Room ventilation)
The hood switches on at low suction
speed (power) for 60 minutes, after
which it switches off.
8 Filter saturation control and
activation/deactivation key
9 Indication of active Hob
2
Hood
function
10 Ambient light ON/OFF key
11 Lights ON/OFF key
Note: hold key down to adjust the
intensity of the light
Control panel on/off function
With the hood in standby, press key1, all
led lights will switch off: the control panel
is off.
Press key 1 again, all led lights will turn on:
the control panel is active.
Carbon lter saturation control activation/
deactivation function
With the hood in standby, press key 5 for
longer than 3 seconds
Key 8 will ash to indicate that the carbon
saturation lter has been activated.
Key 8 will remain lit to indicate that
the carbon saturation lter has been
deactivated.
Filter saturation control and reset
function
At regular intervals and depending on
the hood temperature, key 8 lights
up to indicate that the lters need to
be maintained in accordance with the
instructions in the relative paragraphs.
Key 8 on with a xed light: maintenance is
required on the grease lters
Key 8 on and ashing: maintenance is
required on the carbon lter.
Filter saturation indicator reset
With the hood in standby, press key 8 for
longer than 3 seconds.
Repeat the operation if necessary.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DIK7190HG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DIK7190HG in the language / languages: All languages as an attachment in your email.

The manual is 18,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info