574025

AEG DH 200 97211 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
1918
GB
ASSEMBLY AND CONNECTION
Model DB 130
Connecting to a 12-V vehicle socket:
1. Insert the vehicle plug [10] into the 12 V vehicle socket.
2. Place the double plug socket in such a way that the unit or the cable does
not hinder the driver.
Model DH 200
Connecting to the vehicle battery:
The DH 200 model is connected directly to the battery with the ring terminal
connector cable.
Warning! The connecting cable from the double plug socket must run through
the interior of the vehicle. This is usually achieved by running it along a section
of vehicle body panelling.
If you are unable to run the cable through the interior of the vehicle yourself,
take the job to a vehicle repair shop.
▪
If the connecting cable has to be led through sharp or rough walls (e.g.,
metal panels), use rubber grommets or cable channels to avoid damage to
the cable.
▪
Lay and fasten the cable in such a way that it cannot come into contact with
any movable, hot or sharp-edged parts.
1. Place the double plug socket in such a way that you are not hindered by
the unit or the cable whilst driving.
2. Lead the double plug socket connecting cable from the vehicle interior to the
battery.
3. Connect the terminal connection cable (red ring connection) (+) [6] to the
positive terminal on the battery.
4. Connect the terminal connection cable (black ring connection) (-) [5] to the
negative terminal on the battery.
5. Connect the comfort connection plugs [8] with one another.
OPERATION
Model DB 130
As soon as the vehicle plug [10] is connected with the 12 V vehicle socket and
is conducting an electrical charge, the red LED will illuminate. Now the double
plug socket is ready for use and devices can be connected to both 12 V vehic-
le sockets, as well as to the USB connection socket.
Note that with some vehicles, the 12 V vehicle socket may only function when
the ignition is switched on.
Use the double plug socket for a short time only if the vehicle engine is not
switched on. Failure to ob-serve this can cause the vehicle battery to run down.
After use, always remove the plug from the 12 V vehicle socket. When remo-
ving the connection, pull on the plug itself, and never on the connecting cable.
Model DH 200
To switch the unit on, switch the ON/OFF switch [4] on the double plug socket
to ON. Now the double plug socket is ready for use.
▪
Make sure that the total power consumption connected to the double plug
socket does not exceed 15 A.
Voltage Indicator LED functions [3]:
Red Current < 10.5 V
Yellow Current between 10.5 V-12.5 V
Green Current > 12.5 V
Battery monitor function: As soon as the double plug socket is switched on, an
LED illuminates which corresponds to the battery voltage. If the battery voltage
sinks below 10.5 V, the LED will light up red. If this happens, the double plug
socket will automatically switch off in order to prevent the vehicle battery from
running down. This will resume if the battery return to 11.8 V or above.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DH 200 97211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DH 200 97211 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info