553411
16
Zoom out
Zoom in
Previous page
1/21
Next page
75
Outlet hole - Only for models DF 6260, DF 6260-ml/1
and CHDF 6260 (extractor-filter version)
When used as an extractor unit, the hood must be fitted with a
150mm diameter hose.
Only for model DF 6260 - DF 6260-
ml/1: Should there already be a pipe
of diameter 125 mm that ducts to
the outside through the walls or roof,
it is possible to use the 150/125 mm
reduction flange provided. In this
case the hood will be slightly more
noisy.
Fix the flange on the hood outlet
hole, using 2 screws. Fig. 8a.
Filter version only
Fix the deflector to the flange. Fig. 8b.
Outlet hole - Only for model DF 6160(extractor-filter version)
When used as an extractor unit, the hood must be fitted with a
120mm diameter hose.
The dimensions and position of the air outlet are given in figure 9.
Fix the flange supplied as kit onto the exit hole (bayonet fixture).
Using the adapter, Ø100, Ø110 and Ø125 mm exhausting pipes can
be used.
Ø 125 mm exhausting hose: insert the adapter on the flange and
remove, using a proper tool, the upper unused Ø 100 and Ø 110 mm
rings of the adapter.
Ø 110 mm exhausting pipe: same procedure, but removing
the Ø 100 mm ring only.
Ø 100 mm exhausting pipe: apply the adapter on the flange.
Fig. 8a Fig. 8b
Fig. 9
Fig. 10
A
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DF6260-ML9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DF6260-ML9 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG DF6260-ML9

AEG DF6260-ML9 User Manual - German - 21 pages

AEG DF6260-ML9 User Manual - Dutch - 21 pages

AEG DF6260-ML9 User Manual - French - 23 pages

AEG DF6260-ML9 User Manual - Finnish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info