Manual AEG DDLT PinControl 21 (page 23 of 124) (English, German, Dutch, French, Polish, Polish)

648359

Zoom out

Zoom in

1/124

Installation - for contractors

» Position the lower back panel onto the main back

panel and click into place.

» Align the mounted appliance by loosening the xing

toggle, aligning the power supply and back panel,

and then re-tightening the xing toggle. If the back

panel is not ush with the wall, the appliance can be

secured at the bottom with two additional screws.

10.2 

10.2.1 



D0000041898

» Fit the cable grommet.







» Break out the cable grommet knock-out in the

back panel. Deburr the sharp edges with a le if

necessary.

» Reposition the mains terminal in the appliance from

the top to the bottom.

» Push the back panel over the threaded stud and the

cable grommet. Pull the cable grommet by the lock-

ing hooks into the back panel using pliers, until both

locking hooks audibly click into place.

» Press the back panel rmly into place and lock the

xing toggle by turning it clockwise through 90°.

10.2.2 

Note

-



»  

 









» Cleanly cut or break out the required cable entries

in the back panel (for positions, see chapter "Speci-

cation / Dimensions and connections"). Deburr the

sharp edges with a le if necessary.

» Route the power cable through the cable grommet

and connect it to the mains terminal.

10.2.3 

Install a load shedding relay in the distribution board in

conjunction with other electric appliances, e.g. electric

storage heaters. The relay responds when the instanta-

neous water heater starts.











10.2.4 

Note

-



»  

 



26_02_02_0765

» Fit water plugs with gaskets to seal the connection

on unnished walls.

» Fit a suitable pressure tap.

26_02_02_1006

» Click the lower part of the back panel into place in

the upper part of the back panel.

» Secure the connection pipes to the appliance.

» Secure the back panel at the bottom with two addi-

tional screws.

» Cleanly break out the knock-outs in the appli-

ance cover. Deburr the sharp edges with a le if

necessary.

» Push the lower back panel under the connection

pipes of the tap and click the lower back panel into

place.

» Secure the connection pipes to the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG DDLT PinControl 21 in the language / languages: English, German, Dutch, French, Polish, Polish as an attachment in your email.

The manual is 34,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG DDLT PinControl 21 Manual

Product: