648348
36
Zoom out
Zoom in
Previous page
1/100
Next page
36
Installation – for qualied contractors
18 Nm
26_02_02_0765
24
1
26_02_02_1006
9.4 Wireless remote control installation
The transmitter can be tted to the wall with the wall
retainer. The wall retainer can be secured to the wall with
the adhesive tape supplied or with a suitable countersunk
screw 3 mm (or smaller).
Standard delivery - wireless remote control
OFF
3s
1 2 3
D0000037820
1 Transmitter incl. battery
2 Wall retainer
3 Adhesive pad
10. Commissioning
10.1 Appliance
Commissioning must only be carried out by a contractor.
26_02_02_0888
1
2
3
4
5
» Fill and vent the appliance. Please note - boil-dry risk
(1).
Open and close all connected taps several times,
until all air has been vented from the pipework and
the appliance.
» Activate the safety pressure switch (2) at ow
pressure by pressing the reset button. The appliance
is supplied with the safety pressure limiter in the
triggered state.
» Push the temperature selector cable plug onto the
PCB (3).
» Fit the appliance cover.
For this, hook the appliance cover into the top and
pivot it onto the back panel. The cover must click
audibly into place (4).
Check the rm seat of the appliance cover.
» Switch the mains power ON (5).
» Check the appliance function.
10.2 Wireless remote control FBM Comfort
The wireless remote control is registered at the appliance
in the factory. If there is no data communication during
commissioning, carry out a self-learning process as
follows: Use the ECO key to select the comfort function
Wireless remote control (rc)”, press memory key 1 on the
appliance (this enables the self-learning phase; the bar
graph indication on the display runs), then press any key
on the wireless remote control.
11. Handover
Explain the functions to the user. Draw special attention
to the safety information. Hand these instructions to the
user.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DDLE OKO TD 21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DDLE OKO TD 21 in the language / languages: English, German as an attachment in your email.

The manual is 25,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info