640820

AEG DBS3350 QUICKSTEAM Manual

29
Zoom out
Zoom in
Previous page
1/32
Next page
29
d
GR
NL
F
GB
GB
Troubleshooting
Disposal
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances.
Do not dispose appliances marked with
the symbol
with the household
waste. Return the product to your
local recycling facility or contact your
municipal oce.
Problem Possible cause Solution
Soleplate is not heating even though
iron is turned on.
Connection problem Check main power supply cable, plug
and outlet.
Temperature control is in MIN position. Select adequate temperature.
Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”,
no 2).
Steam control is selected in non-steam
position.
Set steam control between positions of
minimum steam and maximum steam
(see “Ironing chart”).
Selected temperature is lower than that
specified to use with steam.
Increase temperature to at least
.
Steam jet and vertical steam jet
function does not work.
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position and
wait before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to
steam ironing (up to
). Put iron
in vertical position and wait until
temperature indicator light turns o.
Water leaks from the soleplate during
ironing.
The iron is not hot enough. Set the temperature dial to a
temperature
(
to maximum) suitable for steam
ironing. Put the iron on its heel and
wait until the light has gone out before
you start ironing.
Flakes and impurities come out of the
soleplate during ironing.
You have used hard water, which has
causedscaleakestodevelopinthe
water tank.
Press and hold the steam button for
about one minute to get steam. Then
hold one more minute in order to
clean the steam generating system.
Iron an old towel, to ensure that
any residues inside the iron are not
transferred to the laundry.
Water leaks from the soleplate while
the iron is cooling down or after it has
been stored.
The iron has been put in horizontal
position while there is still water in the
water tank.
Empty the water tank and set the
steam control to position o before
storing the iron.
Brown streaks come out of the
soleplate while ironing and stain the
linen.
You have used chemical descaling
agents.
Do not use any descaling agents.
Fabric bres have accumulated in the
holes of the soleplate and are burning.
Clean the soleplate with a damp soft
cloth.
Fabrics might not be properly rinsed or
the garments are new and have not been
washed before ironing.
Please rinse the laundry properly
again.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DBS3350 QUICKSTEAM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DBS3350 QUICKSTEAM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info