527628

AEG DBS2300 Manual

29
Zoom out
Zoom in
Previous page
1/30
Next page
Disposal
Packaging materials
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identied
by markings, e.g. >PE<, >PS<, etc.
Please dispose of the packaging
materials in the appropriate container
at the community waste disposal
facilities.
Old appliance
The symbol on the product
or on its packaging indicates that
this product may not be treated as
household waste. Instead it shall
be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused
by inappropriate waste handling
of this product. For more detailed
information about recycling of this
product, please contact your local
city ofce, your household waste
disposal service or the shop where you
purchased the product.
Disposal
29/30
D
GR
NL
F
GB
Troubleshooting
Problem Possible cause Solution
Water runs out of the holes in the
soleplate.
Water has condensed in the pipes
because you are using steam for the rst
time or you have not used it for some time.
Press the steam control button away
from your ironing board until the iron
produces steam.
The soleplate is not hot enough. Increase the heat of the soleplate.
Your thermostat is faulty: the iron is not
hot enough.
Contact an Approved Service Centre.
White streaks come through the holes in
the soleplate.
Your iron has a build-up of scale because it
has not been rinsed out regularly.
Clean your iron. (see the “cleaning”
section.
Brown streaks come through the holes in
the soleplate and stain the linen.
You are using chemical descaling agents or
additives in the water for ironing.
Never add this type of product in the
water tank or in the boiler.
Fabric bres have accumulated in the holes
of the soleplate and are burning.
Clean the soleplate with a non-metallic
sponge.
The soleplate is dirty or brown and may
stain the linen.
You are ironing at too high a
temperature.
See our recommendations regarding
temperature control setting.
Your linen is not rinsed suciently or
you have ironed a new garment before
washing it.
Ensure linen is rinsed thoroughly to
remove any soap deposits or chemicals
on new garments which may be sucked
up by the iron.
You are using starch. Always spray starch on the reverse side
of the fabric to be ironed.
Stream or water escapes under the
appliance.
The station is faulty. Stop using the station and contact an
Approved service centre.
No steam produced. To small amount water in the water tank. Fill the water tank to MAX level.
Your iron have air in the watertank. After steam lamp lights, press the steam
button for more than one minute to air
the system and then get steam.
… 29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DBS2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DBS2300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info