Manual AEG DBS 5564 (page 38 of 58) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

551730

Zoom out

Zoom in

1/58

ENGLISH

How can I replenish the water during operation?

Rell with water before the tank is completely empty.

The water level is too low if the pump is noisy during operation.

• Place the iron on the rest (6).

• Press the SETTING button to

select the POWER icon

• Move the handle up until it

audibly locks into place.

• Remove the mains plug from the

socket.

• In order to remove the tank, press

the RELEASE button below the

water tank (Fig. F).

• Remove the lime lter cartridge

(Fig. G).

• Fill the tank up to the

maximum mark (Fig. H).

Do not overll!

• Reinsert the lime lter

cartridge and

push the tank

back into the

base (Fig. I + J).

• You can now

continue ironing.

When you have nished

• Place the iron on the rest (6).

• Press the SETTING button to select the POWER icon

• Move the handle up until it audibly locks into place.

• Remove the mains plug from the socket.

• Empty the water tank if the ironing station is not in use for a

longer period of time.

• Allow the device to cool down before you put it away.

Cable Storage

Wind connecting tube and power cable around the cable holder

of the base. Fix connecting tube and power cable with the sup-

plied cable clip. Place the plug between the connecting tubes.

Lime Filter

Your steam iron station comes with a lime lter. The granules

of the lime lter cartridge are light brown to orange when new.

Depending on your water hardness the lime lter cartridge is

used up after approx. 25 full tanks. The lime lter cartridge must

be exchanged if the granules are completely black.

• Switch the device off.

• Remove the mains plug from the socket.

• Remove the water tank.

• Remove the lime lter cartridge.

• Fill the tank up to the maximum mark. Do not overll!

• Replace the lime lter cartridge.

• Wait a few minutes before switching the device on again for

the lime lter cartridge to absorb water.

Fig. F

Fig. G

Fig. J

Fig. I

Fig. H

Note:

Continue ironing with distilled water if you have no lime lter

cartridge at hand.

Caution:

Leave the lime lter cartridge always attached!

Cleaning

W arning:

► Always remove the mains lead before cleaning!

► Wait until the machine has cooled down completely!

► Under no circumstances should you immerse the device

in water for cleaning purposes. Otherwise this might result

in an electric shock or re.

Caution:

► Do not use a wire brush or any abrasive items.

► Do not use any acidic or abrasive detergents.

• Clean the casing with a slightly damp cloth.

• Clean the sole plate and the rest with a slightly damp cloth.

• Any residual water can remain in the water tank, but should

be poured out if it has been in the tank for a prolonged

period.

Troubleshooting

Fault Possible Cause Remedy

Device does not

work

Fault mains socket Try another socket.

The handle is not

moved down.

Move the handle

down.

The electronic

temperature setting

is in position

Select the desired

ironing tempera-

ture.

The device

suddenly stops

working during

operation

Is the electric

circuit overloaded?

Check the house

fuse.

The blue indicator

on the display is

ashing fast

The temperature

is too high for the

selected position.

Wait until the iron

has cooled down

(the blue indicator

stops ashing).

Loud noises during

steam operation

The tank is empty. Check the tank.

Rell water.

hello
kindly can you send me the ic numbers for the aeg dbs 5564 , i need to change it but i didn't have its number because its burnt and its number disappeared .
thanks a lot
best regards Submitted on 27-12-2017 at 18:00
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG DBS 5564 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 16,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG DBS 5564 Manual

Product: