Manual AEG DAB 4130 (page 23 of 26) (English, German, French, Italian)

546367

Zoom out

Zoom in

1/26

English

Display additional DAB information

In DAB mode, you can display the following additional infor-

mation if broadcast by the radio station. To do so, press the

INFO/SETUP button (7).

• <Time/Date>

Displays the time and the current date.

• <DLS>:ShortforDynamic Label Segment. This involves

complementary data. This content may be e.g. informa-

tion about the station or the music title and artist being

played.

• <ProgrammeType>

This indicates the station category (e.g. Pop-Music, News

etc.).

• <EnsembleFreq.>

Frequency of the current radio station.

• <AudioBitRate>

Displays the digital Audio Bit Rate.

• <EnsembleName>

Displays the name of the station group (e.g. DR

Deutschland).

• <Sig.Strenght>

Displays the received signal strength.

Save station

1. If you have found the desired station, hold down the PRE-

SET button (6). The ﬁrst preset location appears on the

display. If the preset location is still empty, the message

“PRESET EMPTY” will appear on the display

2. For choosing the memory position, please press

TUNING+/TUNING- buttons (3).

3. Press ENTER/AUTO-SCAN button to save the settings.

The message “PRESET STORED” appears brieﬂy on the

display.

Select a preset station

1. Press the PRESET button (6).

2. You will select a preset location with the TUNING+/

TUNING buttons (3).

3. Conﬁrm your selection with the ENTER/AUTO-SCAN

button (4).

Alarm function

You can set the device in such a way that it switches on at a

speciﬁc time. Two alarm times can be set.

• Toselectanoption,presstheTUNING+/TUNING-but-

tons (3). The option currently to be set will ﬂash.

• Conrmyourselection,orenterusingtheENTER/AUTO-

SCAN button (4).

Setting the alarm time

1. Press the ALARM/SLEEP button. “ALARM 1” appears on

the display. The display “OFF” ﬂashes.

2. Select the “ON” setting.

3. The message “ALARM1 TIME SET” appears on the

display. Now set the alarm time.

4. Select the source with which you want to be woken up.

Select from: BEEPER 1, BEEPER 2 (beep), DAB, FM.

5. Should the device still not be in standby, press the

STANDBY button (9).

To set the second alarm time, proceed as described above.

Do however press the ALARM/SLEEP button twice at point 1.

The message ALARM2 will appear in the display.

The activated alarm function is shown on the display by the

“

“ symbol. A “1” will appear behind the symbol for the

ﬁrst alarm time, and a “2” for the second alarm time.

Turn off the alarm signal

To turn off the alarm, press the STANDBY button (9).

Snooze

The automatically set alarm function can be switched off by

the SNOOZE button (11) for 9 minutes. To operate the but-

tons, press the top of the device. It tilts forward slightly and

activates the function.

NOTE:

The message ”Zz“ will be shown on the display with an

activated snooze function.

Deactivate alarm function

1. Press the ALARM/SLEEP button (10). “ALARM 1” is show

on the display. To turn off the second alarm time, press

the ALARM/SLEEP button twice.

2. Use the TUNING+/TUNING- buttons to select “OFF”.

Conﬁrm with the ENTER/AUTO-SCAN button.

Cleaning and maintenance

CAUTION:

Do not immerse the device in water.

• Disconnectthemainsplugbeforecleaning.

• Youmaywipeoffexternalstains,usingaslightlydamp

cloth without any additives.

Troubleshooting

Problem Cause Solution

The unit

cannot be

operated

The unit is blocked

and “hangs”

Pull the mains plug

forapproximately

5 seconds. Then con-

nect the unit again

No DAB Ra-

dio reception

Telescopic antenna

incorrectly aligned

Fullyextendthe

telescopic antenna

and align it vertically.

No Digital Radio can

be received in your

area

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG DAB 4130 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG DAB 4130 Manual

Product: