697507

AEG CX7-1-30IW Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
Thank you for choosing an AEG CX7 Classic vacuum cleaner. In order to
ensure the best results, always use original AEG accessories and spare parts.
They have been designed especially for your vacuum cleaner. This product
is designed with the environment in mind. All plastic parts are marked for
recycling purposes.
DESCRIPTION OF CX7 CLASSIC
A. ON/OFF button
B. Power regulation button
C. ON/OFF button, hand unit
D. Locking screw
E. Release button, hand unit
F. Wallholder
G. Charging cable (with adapter)
H. Charging plug
I. Fine lter (inner lter)
J. Pre lter (outer lter)
K. Release button, dust container
L. Dust container
M. Dusting brush
N. Crevice nozzle
O. Cable protector grill
P. Hatch cover for brush roll
Q. Brush roll
R. Charging indicator
S. Cli hanger
T. Slot for accessory storage
BEFORE STARTING
Check that the package includes all parts described in this instruction
manual and read this manual carefully. Pay special attention to the safety
precautions chapter. Save these instructions.
1 Assemble the handle.
2 A) Make sure that CX7 Classic is on a stable and horizontal surface away
from heat sources, direct sunlight or wet places. Attach the wall holder
to the wall 104 cm above the oor with a suitable screw and wall plug.
Make sure to use a correct wall plug for the wall. B) Attach the handle
to the wall holder. C) Connect the charging cable to the back side of the
vacuum cleaner.
3 Insert the adaptor into the mains and charge CX7 Classic. The charging
indicator will be lit when CX7 Classic is on charge.
CHARGING CX7 CLASSIC
4 When fully charged, the charging indicator will blink slowly. The num-
bers of LED lamps will indicate the level of charge.
Full charging time is
around 4hours. For better battery performance, charge CX7 Classic for
24hours before rst use and always keep it on charge when not used.
VACUUMING WITH CX7 CLASSIC
Before vacuuming, check that the nozzle wheels and the brush roll are
clean from sharp objects in order to avoid scratching sensitive oors
and to ensure full cleaning performance.
5 Start and stop CX7
Classic
by pushing the ON/OFF button.
CX7
Classic will start on the high power mode.
For more silent cleaning and longer runtime, press the power regula-
tion button.
VACUUMING FURNITURE, CAR SEATS ETC.
6 Press the button to release the hand unit from the main body.
7 Attach the crevice nozzle to facilitate cleaning of areas dicult to reach.
Attach the brush on the crevice nozzle for dusting.
8 The crevice nozzle and small brush can be stored in the slot on the back
side of the handle.
EMPTYING OF THE DUST CONTAINER
9 Remove the dust container by pressing the buttons.
10 Take out the lters from the dust container by pressing the release but-
tons.
Empty the contents into a dustbin. Never wash the dust container
or lters in a dishwasher.
IMPORTANT  FILTER CLEANING!
11 Pull the lter cleaning rod (B) to its end position and release it to
remove dust from the inner lter. Repeat 5 times.
12 The lters must be cleaned at regular intervals to ensure a high clean-
ing performance.
Take out the lters by pressing the release buttons.
Separate the inner lter from the outer lter.
13 Rinse the lter parts carefully under lukewarm water without using any
detergents. (Never use the dishwasher or washing machine.) S
hake to
remove excess water and leave to dry minimum 12h before putting
them back into the cleaner.
CLEANING THE HOSE AND NOZZLE WHEELS
14 Loosen the hose behind the nozzle from its upper connection. Remove
any object or debris that can be blocking the airow in the hose or in
the air channel to the dust cup, and put the hose back.
15 If the wheels need to be cleaned or get jammed, remove them carefully
by using a at screwdriver.
REMOVING AND CLEANING THE BRUSH ROLL
16 If the brushroll gets blocked C
X7
Classic will stop. Open the cable pro-
tector grill and the brush roll hatch cover and remove the brush roll.
17 Us
e a pair of scissors to remove threads etc. Reassemble the brush roll,
making sure it can spin freely.
REMOVING THE BATTERIES FOR RECYCLING
Warning; Battery removal must only be done by an AEG service
center or ocial collection point!
18 Only remove batteries if the product is to be scrapped. Improper han-
dling of the batteries may be hazardous. Batteries should always be
completely discharged before removal.
Take your product to an AEG
service center or ocial collection point for recycling. They can remove
and recycle the battery and electric parts in a safe and professional way.
Follow your country’s rules for collection of rechargeable batteries and
electrical products.
Enjoy a great cleaning experience with CX7 Classic!
7
www.aeg.com
DE
GB
EL
ES
FR
IT
NL
PT
AR
FA
Nova_Classic_AEG_2017-12-20.indd 7 2017-12-20 08:07:18
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CX7-1-30IW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CX7-1-30IW in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info