551875
26
Zoom out
Zoom in
Previous page
1/26
Next page
26
27
11. The set parameters must be memorised. Select line STORE with
keys
,
and press RC key < or >. A red bar will appear what
means a successful memorisation.
12. To return to table VOLUME, press RC key OK.
Headphones.
13. The TV set (if appropriate to a certain model) has a possibility
of an independent volume control. Select line HEADPHONES with RC
keys
,
. Press RC key < or >. Table SOUND/HEADPHONES will
appear on the TV screen.
14. Select the parameter to be adjusted: volume, balance, high or
low frequency strengthening, language with RC keys
,
, a two
language volume signal is broadcast, while set a desirable volume
with RC key
< or >.
15. The set parameters must be memorised. Select line STORE with
keys
,
and press RC key < or >. A red bar will appear what means
a successful memorisation.
16. To exit from MENU table press RC key OK three times.
Note: The red button of the remote control is used to get directly into
the VOLUME menu.
Remote control button
Selection of five defined settings: “PERSONAL” (to be set in
VOLUME menu), “STANDARD”, “LANGUAGE”, “MUSIC” and
MOVIE.
Remote control button I/II in TV mode- button to select DUALI/DUALII for two-channel
transmissions.
In teletext - button to select the teletext languages.
SOUND
VOLUME 20
BALANCE 00
SOUND AV STEREO
EFFECT OFF
AVL STANDARD
LANGUAGE LANGUAGE1
STORE
EQUALIZER
HEADPHONES
SOUND / EQUALIZER
MODE PERSONAL
EQUALIZER 00
100 Hz +31
330 Hz +23
1000 Hz +15
3300 Hz +25
6600 Hz +31
STORE
SOUND/HEADPHONES
VOLUME 31
BALANCE 00
BASS +15
TREBLE +20
SOUND LANGUAGE LANGUAGE1
STORE
PICTURE
MODE PERSONAL
BRIGHTNESS 20
CONTRAST 40
SATURATION 32
SHARPNESS 20
HUE 00
TINT NORMAL
NOISE REDUCION OFF
STORE
Regulation of picture parameters
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
2. Using RC buttons
,
select the line PICTURE.
3. Push RC button
< or >. The table PICTURE will appear on the
screen.
4. Using RC buttons
,
select the line with desired picture
parameter for regulation: BRIGHTNESS, CONTRAST, SATURATION
or SHARPNESS.
5. Using RC button
< or > set desired value for adjustable parameter.
6. Using RC buttons
,
select the line TINT. Using RC button < or
> you can select desired colour of picture: NORMAL (neutral, grey),
WARM (pink), COLD (bluish).
7. Using RC buttons
,
select the line NOISE REDUCION. Using RC
button
< or > you can select desired level of noise reducion: OFF,
WEAK, MIDDLE, STRONG.
8. You can select one of four fixed modes of picture parameters.
Using RC buttons
,
select the line MODE. Using RC button < or
> you can select desired modes of picture parameters: PERSONAL,
(it suits the fixed meanings in the table PICTURE), STANDARD,
DYNAMIC (enlarged contrast), SOFT (reduced contrast).
Quick adjust of sound and picture parameters
BRIGHTNESS 15
VOLUME 15
CONTRAST 15
SATURATION 15
SHARPNESS 15
Regulation of sound parameters
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
1. Push RC button OK or MENU which is on the front of TV panel. You will
see the regulation’s bar VOLUME on the screen. Using the RC button OK
or TV button MENU, you can select the picture parameters: BRIGHTNESS,
CONTRAST, SATURATION and SHARPNESS.
2. Push RC button
< or >, or buttons P+, P- which are in the front of TV panel,
set the parameter which you want.
Notes:
1. It is possible to regulate the sound just pushing RC button
< or >, when
there is no selected any sound or picture parameter.
2. The regulation bars of parameters turn of approximately in 3 seconds after
the last action.
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
2. Push RC button
< or >. The table SOUND will appear on the screen.
3. Push RC button
< or > and set the sound’s level which you want.
4. Select parameter BALANCE with RC keys
,
. By pressing RC
keys
< or > set a desirable volume balance between volume
channels.
5. Select parameter AVL (automatic volume level) with RC keys
,
. If pressing RC keys < or > you select version OPERATE,
during translation a fixed volume level will be maintained automatically. If you select version
STANDARD – AVL this function will be disabled.
6. Select parameter EFFECT with RC keys
,
. If pressing RC keys < or >you select version
WIDE, the volume will be reproduced with a dimensional effect. If you select version OFF
this function will be disabled.
7. Select parameter SOUND AV with RC keys
,
. By pressing RC keys < or > you may select
what volume signal -MONO or STEREO - you will receive from exterior signal sources via AV inputs.
8. If the receiving channel is broadcast with two language volume, select parameter LANGUAGE
with RC keys
,
, while by pressing RC key < or > select a desirable language LANGUAGE1 or
LANGUAGE2.
9. The set parameters must be memorised. Select line MEMORY with keys
,
and press RC key
< or >. A red bar will appear what means a successful memorisation.
Equaliser.
10. To set a desirable characteristic of the volume channel you may use an equaliser function. Select
line EQUALISER with RC keys
,
. Press RC key < or >. Table SOUND/EQUALISER will appear
on the TV screen. Select one of five available modes: PERSONAL (values are set in the table of
frequencies hereunder by selecting certain frequency with RC keys
,
, while a desirable value
is set with RC keys
< or >), STANDARD, VOICE, MUSIC and FILM.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 652 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 652 in the language / languages: English, German as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info