551875
23
Zoom out
Zoom in
Previous page
1/26
Next page
2330
Automatic update of programmes
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
AUTOSEARCH
AUTOMATIC INSTALLATION
AUTOMATIC UPDATE
AUTOSEARCH
AUTOMATIC INSTALLATION
AUTOMATIC UPDATE
215,25 MHz
CHANNELS FOUND 2
25%
If you want to add new programs to already written programs, you
can use the function of automatic renewal.
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
2. Using RC buttons
,
select the line AUTOSEARCH and push RC
button
< or >. The table AUTOSEARCH will appear on the screen.
3. Select the line AUTOMATIC UPDATE by using RC buttons
,
and then push RC button < or >. All broadcasted TV programs will
be tuned up automatically and will be written into the memory. It takes
few minutes. When the writing will be finished, the first written
program and table EDIT will appear on the screen. This function is
used to customizing the programmes. How to use this table, read in
the head “Customizing your stored programmes”.
4. If you want to leave the MENU tables, push the RC button OK twice.
5. You can switch the programmes using the RC buttons
,
, 0, 1,
, 9 or P+, P- on the front panel of TV.
Manual tune up of programmes
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear in the screen.
2. Using RC buttons
,
select the line MANUAL SEARCH and push
RC button
< or >. The table MANUAL SEARCH will appear on the
screen.
3. Using RC buttons
<, >, 0, 1, ..., 9 select the number of programme,
into which you want to write tuned programme. If selected number
of programme is red, it shows, that the programme is written in the
selected position and will be deleted when you will write the new
programme.
4. Using RC buttons
,
select the line BAND and push RC button
< or > to select desirable band of channels: VHF-L, VHF-H or UHF.
5. Using RC buttons
<, >, 0, 1, ..., 9 to select the line SEARCH. If you
want to start the search, push the RC button
< or > (it depends on
the direction of search). When the programme is founded, the farther
tuning stops. If you want to find and tune up other programme, it is
necessary to push RC button
< or >. It should be repeated until the
desirable programme will be found.
MANUAL SEARCH
PROGRAMM 06
BAND UHF
SEARCH 479,25 MHz
STORE
(VHF-L/L1, VHF-H/L (optional)).
CLOCK
CURRENT TIME 09:51
TIME FROM PROG. 04
TURN OFF TIME −−:−−
TURN ON TIME −−:−−
PROGRAM
SLEEP TIMER OFF
AV modes
8. Using RC buttons
,
select the line PROGRAM. Using RC
buttons 0, 1, …, 9 in the line PROGRAM set the number of
programme in which the TV has to switch automatically.
9. Using RC buttons
,
select the line SLEEP TIMER. Using RC
buttons
< or >, you can set the time after which the television will turn
into the standby mode. The time interval is between 15 and 90 minutes.
If you want to turn off the timer, select the variant OFF.
10. If you want to leave the MENU tables, push the RC button OK twice.
Notes:
1. When you turn off your television using the power button, you have to enter the time meanings anew,
if there is no automatic scan of real time from the teletext.
2. If you turned off your television using the power button, you have to enter the fixed time of switching
off/switching on anew.
Push RC button AV one or few times to select the desired modes of external signal sources:
AV1 selects picture and sound inputs in the SCART1 socket. It is used to
connect VCR, satellite receiver or other equipment.
AV2 selects picture and sound inputs in the SCART2 socket. It is used to
connect the video, satellite receiver or other equipment.
S-VIDEO - selects the inputs of sound, picture’s sharpness and colour signals in the
SCART2 socket. It is used to connect the video, satellite receiver or other
equipment.
FRONT AV- Is used to select the picture and tone input at the FRONT AV connections.
Is used for the connection of video recorder, satellite receiver or another
appliance.
Using teletext
1. Turn on the programme, which broadcasts the information of
teletext.
2. Push RC button TXT and turn on the teletext mode.
3. Using RC buttons 0, 1, , 9 select the desired page (3 numbers).
Your television will start to search the selected page of teletext.
After a while, you will see your selected page with teletext
information on the screen.
4. If some symbols are reproduced incorrectly in the teletext page,
it can be that wrong group of teletext languages is selected. Push
the RC button I/II and select the best-suited group: R/W, R/E, E/W, E/E, GRE.
5. If you want to come back to TV mode, push RC button TV or TXT.
Notes:
1. If there are no teletext in your chosen programme, you will see the note NO TELETEXT when you
switch the TV to the teletext mode.
2. The control of teletext information using other buttons is written in the chapter “Remote control”.
100 100 TV3 01/05 09:48:07
TELETEXT INFORMATION
RGB - selects the inputs of red, green and blue color signals in the SCART1
socket. It is used to connect up the games or other signals.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 652 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 652 in the language / languages: English, German as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info