149841
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
BILD
BETRIEBSART PERSÖNLICH
HELLIGKEIT 20
KONTRAST 40
FARBSÄTTIGUNG 32
SCHÄRFE 20
FARBTON
00
SCHATTIERUNG NORMAL
RAUSCHMINDERUNG AUS
SPEICHERN
6. Wählen Sie mit den Tasten < oder > auf der Fernbedienung die
gewünschte Einstellung.
7. Wählen Sie mit den Tasten
,
auf der Fernbedienung die
Zeile SCHATTIERUNG. Mit den Tasten < oder > auf der
Fernbedienung können Sie den gewünschten Farbton einstellen: NORMAL (neutral, grau),
WARM (rosa), KALT (bläulich) und ADAPTIV.
8. Wählen Sie mit den T asten
,
auf der Fernbedienung die Zeile RAUSCHMINDERUNG. Mit
den T asten < oder > auf der Fernbedienung können Sie die gewünschte Rauschminderung
einstellen: AUS, SCHWACH, MITTEL und STARK.
9. Sie müssen diese Einstellungen speichern. Wählen Sie mit den Tasten
,
auf der
Fernbedienung die Zeile SPEICHERN. Drücken Sie die Tasten < oder > auf der Fernbedienung.
Es erscheint ein grüner Balken, der anzeigt, dass alle Einstellungen gespeichert wurden.
10. Um das Menü zu verlassen, drücken Sie zweimal die Taste OK auf der Fernbedienung.
Bemerkung:
1. Mit der grünen Taste auf der Fernbedienung gelangen Sie direkt zum MENÜ BILD.
2. Mit der Taste PP auf der Fernbedienung können Sie die Bildeinstellungen direkt anwählen.
Wenn Sie das Signal für das NTSC-Farbsystem in den Videoeingang eingeben, wird die Zeile
FARBTON angezeigt. Wählen Sie diese Zeile mit den T asten
,
auf der Fernbedienung. Mit
den T asten < oder > auf der Fernbedienung können Sie den Farbton einstellen.
Bildeinstellung
1. Halten Sie die Taste OK auf der Fernbedienung etwa 2
Sekunden gedrückt, bis das MENÜ auf dem Bildschirm erscheint.
2. Wählen Sie mit den Tasten
,
auf der Fernbedienung die
Zeile BILD.
3. Drücken Sie die Tasten < oder > auf der Fernbedienung, bis
das Menü BILD auf dem Bildschirm erscheint.
4. Sie können zwischen vier voreingestellten Bildeinstellungen
wählen. Wählen Sie mit den Tasten
,
auf der Fernbedienung
die Zeile BETRIEBSART. Mit den Tasten < oder > auf der
Fernbedienung können Sie den Modus PERSÖNLICH (entspricht
den Einstellungen im MENÜ BILD), STANDARD, DYNAMISCH
(höherer Kontrast) oder WEICH (weicherer Kontrast) wählen.
5.Wählen Sie mit den Tasten
,
auf der Fernbedienung die
Zeile mit der gewünschten Bildeinstellung: HELLIGKEIT,
KONTRAST, FARBSATTIGUNG, SCHÄRFE oder FARBTON.
Hinweis: Mit der roten Taste auf der Fernbedienung können Sie
direkt in das Menü LAUTSTÄRKE gelangen.
Fernbedienung Taste
Auswahl von fünf festgelegten Einstellungen: „PERS
Ö
NLICH“
(einzustellen im Menü LAUTSTÄRKE), „STANDARD“, „SPRACHE“,
„MUSIK“ und „FILM“.
Fernbedienung Taste I/II Im Fernsehmodus – Taste zur Auswahl
der Klangeinstellung DUALI/DUALII.
Im Teletext- Taste zur Auswahl Teletext-Sprachen.
15. Die Einstellungen müssen gespeichert werden. Gehen Sie mit
den Tasten
,
, auf SPEICHERN und drücken Sie die Tasten <
oder >. Ein roter Balken zeigt an, dass die Daten erfolgreich
gespeichert wurden.
16. Durch dreimaliges Drücken der Taste OK können Sie das MENÜ
verlassen.
MENÜ
AUTOMATISCHE SUCHE
MANUELLE SUCHE
BEARBEITEN
OPTIONEN
PROGRAMMEINSTELLUNG
TON
BILD
ANSICHT
UHR
TON / EQUALIZER
BETRIEBSART PERSÖNLICH
EQUALIZER 00
100 Hz +31
330 Hz +23
1000 Hz +15
3300 Hz +25
6600 Hz +31
SPEICHERN
TON/ KOPFHÖRER
LAUTSTÄRKE 31
AUSGLEICH 00
BASS +15
HÖHEN +20
TONSPRACHE SPRACHE1
SPEICHERN
21
?
I/II
Switching on of TV
1. Remove the battery cover from the remote control unit and install two AAA type batteries
according to the diagram inside the battery compartment. Replace the battery cover.
2. Connect your aerial to the TV set.
3. Connect your TV to a 230
V AC power socket.
4. Switch on your TV with the
switch on the front panel. The red light will be illuminated.
If the screen doesn’t light up, push the button P- or P+ on the front panel of the television,
or any of the keys
,
, 0, 1, , 9 on the remote control.
Notes:
1. After switching the television set on by using
front panel button, the set switches to
the mode, what is set in the line POWER ON of the menu table OPTIONS:
- it turns on the standby mode, if it is selected. In this mode, lights up the red lamp.
- it turns on to the working state, if the LAST STATE is selected and TV was turned of by
using
front panel button from the working state.
- it turns on to the standby mode, if the LAST STATE is selected and TV was turned of by
using
front panel button from the standby mode.
2. When you turn on the TV from the standby mode to the working mode, the red lamp fades
on the front panel of television.
Switching on
Control of TV set by using MENU tables
Your television is controls using the MENU tables SOUND, PICTURE,
VIEW, CLOCK, AUTOSEARCH, MANUAL SEARCH, EDIT, OPTIONS,
PROGRAM
TUNE, which are shown in the screen when you push
RC button OK longer than 2 second. There are written to the separate
lines the titles of the TV parameters and their ways of the tune up and
selection in the MENU tables.
When you push the colour RC buttons, you can go directly to MENU
tables: SOUND - red, PICTURE - green, VIEW - yellow, CLOCK - blue.
MENU table or the line of table in which is written wanting to change
or tune the parameter, is chosen by RC buttons
,
, and the active
or regulation of this parameter is done by RC buttons
< or >. The MENU tables have gone from the
TV screen, when you push RC button OK or TV one or two times.
Note: the chosen line in the table is marked by cursor and the text’s colour changes.
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM
TUNE
In Teletext mode press to start the search of displayed page again.
In Teletext mode press to reveal hidden text (e.g. answers). Press again to hide this text.
In the television mode - a key of DUALI/DUALII volume mode selection.
The key which choose the groups of teletext languages.
Page expand key. In Teletext mode, press to enlarge top half of the page. Press again to
enlarge the bottom half. Press again to return to normal size.
When this button is pressed, the number of the program being received, the current time
(if set), status of the shut down timer, settings of fixed picture parameters are shown.
SLEEP Sleep Timer key. Press to set the time after which the TV set automatically switches
into standby mode. Each pressing of the key increments the time by 15 minutes up to 90
minutes. To disable, repeatedly press the key until the set time returns to zero. The set
time is displayed on the screen for a short time after each key press.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ctv 4822 st vt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ctv 4822 st vt in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info