149841
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
MANUELLE SUCHE
PROGRAMM 06
BAND UHF
SUCHE 479,25 MHz
SPEICHERN
Manuelle Programmeinstellung
1. Halten Sie die Taste OK auf der Fernbedienung für etwa 2
Sekunden gedrückt, bis das MENÜ auf dem Bildschirm erscheint.
2. Wählen Sie mit den Tasten
,
die Zeilen MANUELLE
SUCHE und drücken Sie die Tasten < oder > auf der
Fernbedienung. Die Anzeige MANUELLE SUCHE erscheint auf
dem Bildschirm.
3. Wählen Sie mit den Tasten <, >, 0, 1, ..., 9 die Nummer, unter
der Sie das ausgewählte Programm speichern möchten. Wenn
die ausgewählte Programmnummer rot angezeigt wird, wurde
schon ein Programm am ausgewählten Platz abgespeichert und
wird bei einer Neuprogrammierung überschrieben.
4. Wählen Sie mit den Tasten
,
die Zeile BAND und drücken
Sie die Tasten < oder > auf der Fernbedienung, um den
gewünschten Frequenzbereich auszuwählen: VHF-L, VHF-H
oder UHF (VHF-L/L1, VHF-H/L und UHF/L (Optional)).
5. Wählen Sie mit den Tasten <, >, 0, 1, ..., 9 die Zeile SUCHE.
Beginnen Sie die Suche mit den Tasten < oder > auf der
Fernbedienung (je nach Suchrichtung). Wenn das Programm
gefunden wurde, wird die Einstellung gestoppt. Wenn Sie ein
anderes Programm finden und einstellen möchten, drücken Sie die Tasten < oder >, bis Sie das
gewünschte Programm gefunden haben.
Wenn Sie den Frequenzbereich des Programms kennen, können Sie diesen direkt mit den
Tasten 0, 1, ..., 9 auf der Fernbedienung eingeben.
Bitte speichern Sie dieses Programm.
6. Wählen Sie mit den Tasten
,
die Zeile SPEICHERN und drücken Sie die Tasten < oder >.
Sie sehen an der Anzeige auf dem Bildschirm, dass das Programm gespeichert wurde.
7. Um weitere Programme einzustellen, wählen Sie mit den Tasten
,
die Zeile PROGRAMM
und wiederholen Sie diesen Vorgang von Schritt 3 – 6, bis Sie alle gewünschten Programme
eingestellt haben.
8. Um das Menü zu verlassen, drücken Sie die Taste OK auf der Fernbedienung zweimal.
Einstellung Ihrer gespeicherten Programme
Sie können die Programme benennen (NAME), sie verstecken
(VERSTECKEN), die Reihenfolge der eingestellten Progamme
verändern (ÄNDERN) oder unerwünschte Programme löschen
(LÖSCHEN).
1. Halten Sie die Taste OK auf der Fernbedienung für etwa 2
Sekunden gedrückt, bis das MENÜ auf dem Bildschirm erscheint.
2. Wählen Sie mit den Tasten
,
die Zeile BEARBEITEN und
drücken Sie die Tasten < oder > auf der Fernbedienung. Die
Anzeige BEARBEITEN erscheint auf dem Bildschirm.
3. Wählen Sie mit den Tasten <, >, 0, 1, ..., 9 das Programm, das
Sie bearbeiten möchten.
Benennung:
4. Wählen Sie mit den Tasten
,
die Zeile NAME. Wählen Sie mit den Tasten < oder > auf der
Fernbedienung die Zeichenposition und geben Sie mit den
MENÜ
AUTOMATISCHE SUCHE
MANUELLE SUCHE
BEARBEITEN
OPTIONEN
PROGRAMM EINSTELLUNG
TON
BILD
ANSICHT
UHR
MENÜ
AUTOMATISCHE SUCHE
MANUELLE SUCHE
BEARBEITEN
OPTIONEN
PROGRAMMEINSTELLUNG
TON
BILD
ANSICHT
UHR
Tasten , ein Zeichen von A-Z,
0-9, ., /, +, -, Leertaste ein.
25
Individual setting of programmes
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
PROGRAM TUNE
PROGRAM 06
VOLUME +1
BRIGHTNESS 2
ASPECT RATIO 4:3
SYSTEM AUTO
STANDARD AUTO
FINE TUNING 575,19 MHz
AFC ON
STORE
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
2. Using RC buttons
,
select the line PROGRAM TUNE and
push RC button
< or >. The table PROGRAM TUNE will appear
on the screen.
3. Using RC buttons
<, >, 0, 1, ..., 9 select the programme, for which
you want to perform the individual settings.
The correction of sound.
4. Sometimes the sound level of various programmes is different. This
function lets you to correct the sound for every programme individually,
and you wouldn’t need to correct volume when switching the
programmes.
Using RC buttons
,
select the line VOLUME. Pushing RC button
< or > you can change the sound’s level from -7 to +7.
The correction of the picture lightness.
5. Sometimes the picture brightness of various programmes is
different. This function lets you to correct the brightness for every
programme individually, and you wouldn’t need to correct brightness,
when switching the programmes.
Using RC buttons
,
select the line BRIGHTNESS. Pushing RC
button
< or > you can change the level of brightness from -7 till +7.
Format.
6. Using RC buttons
,
select the line ASPECT RATIO. Pushing RC button < or > you can select
the picture format: 4:3 (it is usual format for most television stations) or 16:9 (DVD movies format).
System.
7. Using RC buttons
,
select the line SYSTEM. Push RC button < or > and you can select the colours
system: AUTO, SECAM and PAL. The recommendation is to leave AUTO system. To select the
concrete system can be useful unless the identification of colours is unstable for bad quality of signal.
Standard.
8. Using RC buttons
,
select the line STANDARD. Push RC button < or > and select the standard
of sound: AUTO, BG, DK, I. The recommendation is to leave AUTO. If you select wrong standard of
sound, the sound will be gone.
Fine tuning.
9. If depending on bad air conditions or other reasons, the view quality is bad, you can get better results
using the fine tuning.
Using RC buttons
,
select the line FINE TUNING. Push RC button < or > and try to get better results
using the fine tuning. When you will finish the tuning, your TV automatically will be back to the previous
table.
Automatic readjustment of frequency.
10. Using RC buttons
,
select the line AFC. Using RC button < or > you can turn on (ON) or turn
off (OFF) the automatic readjustment of frequency. Turned on this function, the television automatically
seeks the frequency of transmitter.
11. You have to write the parameters in to memory. Using RC buttons
,
select the line STORE. Push
RC button
< or >. You will see the blue bar. It means that everything was written successfully in the
memory.
12. If you want to perform the same operation with other programs, using RC buttons
,
select the
line PROGRAM and repeat this procedure, like it is written in the 3-11 steps.
13. If you want to leave the MENU tables, push the RC button OK twice.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ctv 4822 st vt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ctv 4822 st vt in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info