474118
71
Zoom out
Zoom in
Previous page
1/96
Next page
71
ENGLISH
NOTE: Wall mounting
You can alternatively mount the device with the help of a suitable VESA standard wall bracket (available from dea-
lers) to a suitable wall.
- Gap between holes in millimeters: 100 x 100.
- Thread: M4. The pitch length of the screws may not exceed 10 mm.
The stand is not tted when mounting to a wall.
Maintain a clearance of at least 8 cm for ventilation around the device.
Check the reach of the cable! When mounting the device, make sure that an easily accessible outlet is available
within reach of the power cable.
4.3 Connect Antenna Cable
The TV set festures a tuner to receive TV signals via antenna/cable and DVB-T signals.
CAUTION:
Connect the antenna cable before connecting to mains power supply.
DVB-T reception: The device is intended for reception via passive DVB-T antenna.
Connect the DVB-T antenna to ANT input.
In the source menu (press
SOURCE
button) select DTV.
Other Antenna Connections
For optimum trouble-free picture quality use a dual shielded 75 ohm antenna cable.
1. Connect a 75 ohm antenna cable to the antenna wall outlet.
2. Connect the other end to antenna input ANT at the rear of the device.
3. In the source menu (press
SOURCE
button) select ATV.
NOTE:
To be able to watch TV you rst have to search for channels (
see “4.5 Initial Installation“ on page 71).
4.4 Power Connection
The power supply is designed for AC 100-240 V~ 50/60 Hz.
Connect the power supply to the DC 12 V/3 A jack on the TV set. Then plug the power supply into a properly installed
wall socket.
CAUTION:
Connect all devices before connecting the TV set to mains power supply. The wall outlet must be freely accessible at all
times.
4.5 Initial Installation
When turning the TV set on for the rst time a window is displayed to
select the menu language and to start Channel Search.
1. When the indicator light turns red, press the POWER
button on
the remote control. The “Select OSD Language” window is dis-
played.
2. Press OK to conrm German as OSD language or press the arrow
buttons / / / on the remote control and OK to select your
language.
3. Press the arrow buttons / / / to select the country of your location.
4. Press OK to start Channel search. This process will take a few minutes. Progress is displayed on screen.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 2403 LED-DVD-DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 2403 LED-DVD-DVB-T in the language / languages: English, German, Italian as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info