474116

AEG CTV 2207 LED-DVD-DVB-T Manual

72
Zoom out
Zoom in
Previous page
1/96
Next page
72
ENGLISH
4.6 Select Source
1. In on mode press the SOURCE button. The source menu (connected devices) is dis-
played.
2. Press the arrow buttons / on the remote control or CH +/- on the device to select
the desired source.
3. Press OK or VOL +/- on the device to conrm.
NOTE:
Press the EXIT button to exit the menu without changes.
5. Connect External Devices
Your TV set features a variety of connectors for dierent devices (e.g. DVD recorder, PC, camera and set top box).
IMPORTANT! Ensure that your TV set and all devices to be connected are turned o before connection. Observe the user
manuals of devices to be connected.
SCART Connector
Good quality analogue image and sound signals are transmitted via the SCART connector on the left hand side of the
device. Connect here devices such as VCR, satellite receiver, game console or Pay-TV decoder.
• Connect the Scart adapter cable to the SCART connector on the TV set.
• Connect the device via the full-featured SCART cable with the Scart adapter cable jack.
• In the source menu (press
SOURCE
button) select SCART.
NOTE: Switching voltage
When an external device is switched on, the switching voltage is activated. This ensures that the TV automatically
switches to the SCART input. (Only when a fully wired SCART cable is used.)
• When the externally connected device is switched OFF, the switching voltage is also switched o. The TV set then
always switches to ATV mode depending on its design.
VIDEO Connectors
You can connect e.g. a video camera via the RCA jacks L and R and the AV jack on the back of the unit.
• Connect the device via RCA cable to AV, L and R.
IMPORTANT! Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and audio R = red).
• Select signal input AV in the source menu (press
SOURCE
button).
PC Connector
• Use a VGA cable to connect the monitor connector of the PC with the VGA connector on the TV set.
• Use an audio cable to connect the audio connector of the PC with PC AUDIO on the TV set.
• In the source menu (press
SOURCE
button) select PC.
Component Connector
The component connector Y Pb Pr transmits analogue image signals of external devices, e.g. AV receiver or DVD recorder
in very good quality.
• Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs Y Pb Pr on the TV set.
• Use an audio cable to connect the audio output of the external device with the audio connectors AUDIO L and R on
the TV set.
• In the source menu (press
SOURCE
button) select YPbPr.
HDMI- Input
Digital video and audio signals from an external device are transmitted in high quality via the HDMI ports.
• Use an HDMI cable (not supplied) to connect the HDMI output of the external device with the HDMI input on the TV
set.
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 2207 LED-DVD-DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 2207 LED-DVD-DVB-T in the language / languages: English, German, Italian as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info