28805
44
Zoom out
Zoom in
Previous page
1/53
Next page
OPERATION
11
VACUUM FLUORESCENT DISPLAY
Exhibit current frequency and activated
functions on the display (23).
FLASHING LED
If the front panel does not install in the
main unit, the LED (12) will be flashing.
REMOTE SENSOR
Point the remote control handset to the
remote sensor IR (24). Press the function
keys on the handset to control the system.
RESET FUNCTION
RESET button (25) must be activated
with either a ballpoint pen or thin metal
object.
The RESET button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (25), the
unit can't work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the front panel.
FM FM1 Fm2
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MD button (6) shortly to
select radio mode, the radio mode
appears in the display together with
the memory band an frequency.
SELECTING THE FREQUENCY
BAND
At radio mode, press BND button
(13) shortly to select the desired band.
The reception band will change in the
following order:
/LOU
SELECTING STATION
Press TUN/TRK button(17)
or button TUN/TRK (16)
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished. And then 6
strongest stations are stored into
the corresponding preset number
button.
- Program scanning
Press AS/PS button (18) shortly to
scan preset station, When the
field strength level is more than the
threshold level of stop level, the
radio is holding at that preset
number for several seconds with
release mute, then searches again.
STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station, which
had been stored in the memory. Press
this button for several seconds (until
2ND beeps come out), current station
is stored into the number button.
FM
shortly to activate automatic seek
function. Press for several seconds
until "MANUAL" appears on the
display, the manual tuning mode is
selected. If both buttons have not
been pressed for several seconds,
they will return to seek tuning mode
and "AUTO" appears on the display.
RDS (RADIO DATA SYSTEM)
OPERATION
- Setting RDS mode
Press AF button (3) and release
immediately to switch on or off RDS
mode.
Whenever RDS is switch on,
symbol AF appears on the display.
Program name is displayed on
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CSFMP400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CSFMP400 in the language / languages: German as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info