28801
45
Zoom out
Zoom in
Previous page
1/54
Next page
RESET FUNCTION
RESET button (24) must be activated
with either a ballpoint pen or thin metal
object.
The RESET button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (24), the unit
can't work yet, please use a cotton swab
socked in isopropyl alcohol to clean the
socket on the front panel.
OPERATION
FM1 FM2 FM3
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD button (6) shortly to select
radio mode, the radio mode appears
in the display together with the
memory band an frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press BND/LOU button
(13) shortly to select the desired band.
The reception band will change in the
following order:
SELECTING STATION
Press button(17) or button
(16) shortly to activate automatic
seek function. Press for several
seconds until "MANUAL" appears on
the display, the manual tuning mode
is selected. If both buttons have not
been pressed for several seconds,
they will return to seek turning mode
and "AUTO" appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished, And then 6
strongest stations are stored into
the corresponding preset number
button.
- Program scanning
Press AMS button (18) shortly to
scan preset station, When the
field strength level is more than
the threshold level of stop level,
the radio is holding at that preset
number for several seconds with
release mute, then searches
again.
STATION STORING
Press any one of the preset buttons
(14) (1 to 6) to select a station,
which had been stored in the
memory. Press this button for
several seconds (until 2ND beeps
come out), current station is stored
into the number button.
RDS (RADIO DATA SYSTEM)
OPERATION
- Setting RDS mode
Press AF button (3) and release
immediately to switch on or off
RDS mode.
Whenever RDS is switch on,
symbol “AF” appears on the
display.
Program name is displayed on
receiving a RDS station.
AF” starts blinking if the
broadcasting signal getting worse.
ALARM” will be displayed when
an emergency broadcasting is
received, meanwhile sound output
level will be adjusted to the preset
output level automatically when
the volume control is set at
minimum.
- Regional Program Operation
Press AF button (3) for several
seconds to switch on or off region
mode.
Some broadcasting stations
change their program from normal
broadcasting to regional
11
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CSFMP200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CSFMP200 in the language / languages: English, German as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info