Manual AEG CR (page 38 of 54) (English, German, Italian, Polish, Portuguese, Spanish)

482901

Zoom out

Zoom in

1/54

English

Installation Tips

• Cableprotectionsleevesprotectcablesagainstfraying

on sharp body parts.

• Theinsulationofthecablesmustnotbedamagedduring

installation.

• Itisessentialtousethecorrecttoolswheninstallingcar

hi-ﬁ.

Depending on the model, your vehicle may deviate from the

above description. We do not accept any liability for damage

caused by installation or connection errors or for consequen-

tial damage.

Important Information for installing your

carradio!

1. The device is designed for the minus pole of the battery,

which must be connected to the body of the vehicle.

Please check this before installation.

2. When installing/connecting your device please note that

not every vehicle is equipped with an “ISO connection”.

In this case we recommend the use of an ISO adapter

speciﬁcally designed for your vehicle.

Adapters are available from car accessory shops and/or

from your vehicle workshop.

3. Depending on the speciﬁc car type, different wiring

connection of the “Duration +” wire (Constant current

connection) are available. (However, this is necessary for

storing the radio stations).

In order to guarantee all functions, installation in line with

these instructions is essential. In cases of doubt please

contact an authorised car workshop.

Due to the various types of motor vehicles and motor

manufacturers, it is not possible to guarantee that the

pin assignment of the ISO plug is correct, even if the ISO

plug connections ﬁt together mechanically. It may there-

fore be necessary to modify the electrical connection or

use vehicle-speciﬁc adapters.

NOTE:

If the device is correctly connected, the radio can

be switched on and off via the ignition. If the stored

stations are lost, this indicates that the radio is not

receiving any “continuous +”, current which is required

for storing the stations.

CAUTION:

Where there is a connection to “continuous +” without

the ignition being switched on, the car battery might be

drained of power even if the radio is switched off. This

may even result in the battery becoming completely

ﬂat.

4. Depending on the speciﬁc car type, interferences may

arise during radio/CD operation. These interferences can

avoided easily with an additional Interferences ﬁlter.

YourcarradioisoriginallypreparedwithanInterference

Filter already.

In these case, please contact your authorized car dealer.

5. When installing your radio please ensure that there is

enough space at the rear of the radio to ensure sufﬁcient

cooling.

6. For the antenna connection there are two different

norms. The ﬁrst of these is the old (50 ohm) version with

a long protruding round contact on the vehicle and a

round socket on the radio end. The second is the ISO-

standardised antenna plug (150 ohm). Adapters for both

formats are available from accessory manufacturers and/

or your car workshop.

NOTE:

Important information for VW/Audi vehicles: Your

car may have an active antenna. It requires a power

supply as it is provided only by original car radios. In this

case, use a phantom-powered antenna adapter.

Antenna adapters are available at car accessory suppli-

ers and/or your automotive workshop.

Installation

Please install the car radio as shown below.

a Nut

b Spring washer

c Plain washer

d Screw

e Mounting bracket

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG CR in the language / languages: English, German, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG CR Manual

Product: