Manual AEG Competence D81005D (page 53 of 56) (English)

10804

Zoom out

Zoom in

1/56

CONNECTING TO MAINS TERMINAL

Make connection as shown in Fig. 7 by

proceeding as follows:-

Preform wires to the appropriate shape to suit

fitting into the mains terminal block.

Strip inner insulation on wires using

wirestrippers.

Twist the bared wires using pliers.

Cut bared wires 10mm away from the end of

the inner insulation. Where uninsulated Earth

wires are used ensure they are suitably

sheathed to leave 10mm bare wire to fit into

the terminal.

Clamp bare wires into the relevant terminal and

check they are held by tugging each one in turn.

Clamp the mains cable securely ensuring 5mm

of the outer insulation is inside the terminal

block and that the wires are not taut but not so

slack as to cause any fouling. See Fig. 7.

Place fuse/miniature circuit breaker in circuit

and switch on at mains.

CONNECTING TO A HOB OR COOKER

POINT

Either follow in general terms the instructions

for connecting to the terminal block or refer to

the hob suppliers installation instructions.

CHECKING ELECTRICAL

CONNECTIONS

Correct electrical connection can be confirmed

when switching on the appliance as the timer

will be flashing.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried

out before the cooker is connected to the mains

supply and re-checked after fitting.

WARNING: This cooker must be

earthed.

Feed the cable through the cabinet and

arrange to route the cable away from

the cooker which may become hot.

Fig. 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG Competence D81005D in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG Competence D81005D Manual

Product: