10804

AEG Competence D81005D Manual

37
Zoom out
Zoom in
Previous page
1/56
Next page
CLEANING INSIDE THE OVENS
The vitreous enamel coating in the ovens can be
cleaned using normal oven cleaners or aerosol oven
cleaners with care. Ensure that the manufacturers
instructions are followed and that all parts are well
rinsed afterwards.
CARE OF STAYCLEAN SURFACES
Stayclean surfaces destroy splashes of food and fats
when the oven temperature is raised to around 220°C.
It is a good idea to run the oven for an hour or two per
week to ensure continued good performance from the
Stayclean finish.
Manual cleaning of Stayclean is not recommended.
Damage will occur if oven sprays or abrasives of any
kind are used.
Slight discolouration and polishing of the Stayclean
surface may occur in time. This DOES NOT affect
the Stayclean properties in any way.
A good time to allow the oven to run on is after the
weekly roast. After removing the roast, turn the oven
up to 220°C and allow to run for an hour or so. It is
important NOT to allow a build-up of soilage as this
can prevent the Stayclean from working.
Follow the recommendations below to keep oven
soilage to a minimum.
Cook at the recommended temperatures. Higher
temperatures during roasting will increase soilage.
Try cooking at lower temperatures for an increased
length of time, you will save energy and often the
joint is more tender.
Use minimal, if any, extra oil or fat when roasting
meat, potatoes only require brushing with fat before
cooking. Extra fat in the oven during roasting will
increase splashing and soilage.
Do use the trivet in the meat tin to prevent excess
splattering onto the oven interior.
It is NOT necessary to add water to the meat tin
when roasting. The water and the fat juices from the
joint create excessive splattering during cooking -
even at normal temperatures, as well as causing
condensation.
Covering joints during cooking will also prevent
splashing onto the interior surfaces. Removing the
covering for the last 20-30 minutes will allow extra
browning if required. Some large joints and turkeys
especially benefit by this method of cooking, allowing
the joint to cook through before the outside is
overbrowned.
REMOVING AND REPLACING WIREWORK
SIDE RUNNERS
Remove all shelves and furniture from the oven. If fitted
ensure the telescopic runners are pushed back into
place in the oven cavity. Hold the bottom of the
wirework runners and draw the runners towards the
centre of the oven. Unhook from the top and remove.
The telescopic runners should be dried carefully after
washing in hot water to which washing up liquid has
been added. If heavily soiled mild abrasives may be
used.
To replace the runners, hook the wirework side runner
into the cavity, slide back and press into place.
CLEANING THE GRILL AND OVEN
FURNITURE
All removable parts, except the grill pan handle and
telescopic runners can be washed in the dishwasher.
Alternatively soak them in hot soapy water if heavily
soiled. They will then clean more easily.
The grill pan, meat tin, trivet and grill deflector may be
cleaned using a soap impregnated steel wool pad. The
grill pan grid, wirework runners and oven shelves should
be cleaned using hot soapy water. Soaking first will
make cleaning easier.
36
CAVITY CENTRE
BRACKET
Ensure the wirework runners are firmly in
position before replacing the oven shelves.
Aerosol cleaners must not come into
contact with elements or the door seal as
this may cause damage.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Competence D81005D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Competence D81005D in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info