Manual AEG Competence 5210 BU-d (page 63 of 68) (English)

10530

Zoom out

Zoom in

1/68

FITTING INTO THE SPACE

BETWEEN CABINETS

Ensure the cooker is in front of the cabinet.

See Fig. 13.

Take out all oven furniture before installation

to reduce the weight you need to lift.

To place the cooker into the space between

cabinetry follow the procedure below:

N.B. Two people will be required to carry out

the lifting procedure.

Each person should squat either side of the

cooker.

Tilt the cooker so that your hands can

support the underside of the cooker.

Raise the appliance to the correct height.

Rest the rear underside of the cooker on the

mounting brackets while your hands support

the front.

The cooker can be pushed fully into the

space. Take care to avoid fouling the mains

lead.

Ensure the cooker is central and level.

When the cooker is fully housed, screw the

stability screws (supplied with the cooker) into

the underside of the worksurface in the

positions indicated (see Fig. 14), taking care

not to distort the trim. It is advisable to turn

each screw alternately to avoid damaging the

trim.

Place the top trim flush with the edge of the

worksurface, with the cork spacers upover

(see Fig.15) and screw into position using the

screws supplied with the cooker.

Replace the plinth board.

Switch on the cooker and refer the user to the

operating instructions.

INSTALLATION INSTRUCTIONS

IMPORTANT: Ensure that the oven is

switched off at the wall before any

further work is carried out.

Fig.13

Fig.14

Fig.15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG Competence 5210 BU-d in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG Competence 5210 BU-d Manual

Product: