1. Clean the filter insert and the glass jug after ev
use with mild detergent and warm wa
dishwasher
2. If necessary
(2) and the lid (1) with a damp cloth.
3. Wipe down the housing with a damp cloth. If necessary
use a little mild detergent to r
Cleaning the Grinder Shaft
1. R emove the coffee beans fr
compartment (2). (Apart from the few beans that you
cannot reach by hand.)
2. Insert a paper filter into the filt
3. Press the button (18) to swit
The grinding process will start
4. Once the rest of the coffee beans have been
ground - you can tell this fr
grinding noise – stop the grinding process by pr
the button (26) again.
5. T
it a little anticlockwise until it disengages. Lift it off.
6. Move the grinding fineness dial (8) to the OPEN
position.
7. Pull out the top part of the grinder (3) by the small
handle.
8. Clean the grinder shaft and the grinder with the
cleaning brush that is supplied.
9. Reinsert the t
Make sure it is in the corr
Fold the handle down again.
10. Adjust the grinding fineness dial back to a grinding
fineness. The grinder is locked again.
11. Place on the coffee bean compartment at an angle and
turn it clockwise a little until it engages.
12. Open the filter compartment (5) to remove the paper
filter
13. T
button (19) until the symbol occurs. Pr
(18). The coffee powder tunnel gate will open. Open the
filter compartment, use the brush t
inside, close the filter compartment, pr
to close the coffee powder tunnel gate.
Descaling
As a precaution we recommend descaling after 60 uses.
Use only environmentally friendly descaling agent and
always follow the manufactur
Fill the water tank with wat
the jug with lid on the warming place. Wait 15 minut
then press descaling button and press ST
start the appliance. Let the wa
two more brewing cy
appliance to rinse through pr
If the brewing process is to be abort
press the button (26). The oper
the device will abort the brewing pr
Making Coffee with Coffee P
1. Fill the water tank.
2. Open the filter compartment and insert a paper filter
Add the quantity of coffee powder you want
filter compartment.
3. Set the desired number of cups with the button .
4. Press the button. The symbol (14
the display
5. Press the button (18) to st
If the brewing process is to be abort
press the button (26). The oper
the device will abort the brewing pr
Making coffee with a pre-set time
To make coff
set (see “Setting the time”).
1. Make prepar
beans or coffee powder
2. Set the desired number of cups with the button .
3. For making coffee with coffee powder
button before the timer is set
The symbol (14) appears on the display
4. Press the timer button until the indicator time (
flashes on the display
5. Use the and buttons to set the start time y
want. F
(24) to se
6. T press the start button
again. The symbol (15) appears on the display
The pre-set time is activated.
Once the pre-set time is reached, the device switches on
automatically
symbol flashes on the display
Deactivating the pre-set time
To deactiva
CANCEL button (26). The symbol (15) goes out and the
programming is deactiva
retained and can be r
pre-set time is programmed or the device has been
disconnected from the power supply
Cleaning and Care
Do not use any toxic, corr
agents or scouring sponges to clean the device.
These can damage the surface.
Setting the Number of Cups
Ke ep pr e ssing the butt on until the displa y ( 7 ) shows
the numb er of cups y ou w ant ( 12).
The selec t ed numb er of cups is sa v ed until a new numb er
of cups is se t or the de vice has b een disconnec t ed fr om
the p ower supply . All of the w a t er in the w a t er t ank is
alw a y s used up , r egar dle ss of the se t numb er of cups or
coff ee s tr ength.
S e tting the Coff ee S tr ength
T he coff ee s tr ength c an b e se t when making coff ee with
coff ee b eans. T o do this, k eep pr e ssing the butt on (2 4 )
until the coff ee s tr ength ( 1 3) y ou w ant is shown on the
displa y .
- Mild coff ee
- Medium coff ee
- Strong coffee
The selected coffee strength is sa
strength is set or the device has been disconnect
from the power supply
K
The device has an automatic keep-warm function. The
hotplate remains swit
brewing process. Af
warm icon (17a) in the display will be lit
keep-warm function prematurely
to cancel.
Drip Stop
The device has a drip stop which pr
dripping out of the filter when the jug has been remov
from the device. When the device is in oper
compartment (5) must be closed and the jug with lid
placed must be placed beneath the filter compartment
During the brewing process, the jug must not be r
from the device for longer than 30 seconds as o
the filter could overflow
Prepar
Making coffee with coffee beans
1. Fill the water tank.
2. Fill the coffee bean compartment
3. Set the grinding fineness you want.
4. Open the filter compartment and insert a paper filter
Close the filter compartment.
5. Set the desired number of cups by pressing .
6. Set the desired coffee strength with the buttn .
7. Press the button (18) t
the brewing process.
Components
1. Lid for the coffee bean compartment
2. Coffee bean compartment
3. Grinder (top part remov
4. Control panel
5. Filter compartment
5a. Filter insert
6. Glass jug with lid
7. Display
8. Grinding fineness dial
9. W
10. Fill-level indicator
11. Wat
12. Indicator number of cups
13. Indicator coffee strength
14. Indicator coffee powder
15. Indicator timer
16. Indicator time
1 Indicator operation (flashing)
17a. Indicator keep warm-function
18. start button with operating lamp
1 Descaling/
20. Setting pre-set time
21. Setting the hours
22. Setting the minutes
23. Setting the number of cups
24. Setting coffee strength
25. Making coffee with coffee powder
26. Cancel button
Getting started
W ip e the de vice with a clean, damp clo th. Rinse the glass
jug ( 6 ) and the filt er insert (5a) with a little mild
de t er gent and w a t er .
P rior t o pr eparing coff ee f or the fir s t time, p erf orm one
br ew with w a t er only . Fill the fr e shw a t er t ank up t o the
t op cup marking with cold w a t er . Close the lid. P r e ss
t o s t art the appliance. Allow the w a t er t o flow thr ough
int o the coff ee jug. When br ewing is finished, emp ty the
coff ee jug.
Handling and Op er a tion
S e tting the time
A s so on as the appliance is plugged int o a so ck e t , the
display lighting turns on and the time display
12:00 flashes. The clock has a 24-hour time format.
Set the hours by long pressing;
For both hours & minutes.
1. Keep the butt
2. Keep the button pressed t
The time is saved until a new time is set or the device has
been disconnected from the power supply
Filling the water t
1. Open the water tank lid (9).
2. P
number of cups you want (maximum 10 cups) into the
water tank (11).
3. Close the water tank lid.
Adding coffee beans
1. T
Ensure that the water t
beans can fall into the water t
2. Fill the coffee bean compartment (2) with coffee beans.
Do not overfill.
3. Place the lid back on the coffee bean compartment.
Setting the Grinding Fineness
Move the dial for the grinding fineness (8) to the position
you want fine/
When you switch to another grinding s
still be coffee powder with the previous grinding str
in the grinder shaft. The grinder shaf
cleaned beforehand. (see chaptCleaning the Grinder
Shaft)
Inserting the Filter
1. Open the filter compartment (5).
2. Insert a paper filter into the filt
Close the filter compartment. It mus
SAFETY ADVICE
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made
by children without supervision.
The appliance may only be connected to a power
supply whose voltage and frequency comply with
the specifications on the rating plate! Never use or
pick up the appliance if – the supply cord is
damaged, – the housing is damaged. The
appliance must only be connected to an earthed
socket.
If necessary an extension cable suitable for 10 A
can be used. If the appliance or the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person, in
order to avoid hazard.
Always place the appliance on a flat, level surface.
Never leave the appliance unattended while
connected to the supply mains.
The appliance must be switched off and the mains
plug withdrawn each time after use, before cleaning
and maintenance.
The appliance and accessories become hot
during operation. Use only designated handles and
knobs. Allow to cool down before or storage.
The mains cable must not come into contact with
any hot parts of the appliance.
Do not immerse the appliance in water or any other
liquid. Do not exceed the maximum filling volume as
indicated on the appliances. Do not use or place the
appliance on a hot surface or near source of heat.
This appliance is intended to be used in household
and similar applications such as:
– staff kitchen areas in shops, offices and other
working environments;
– farm houses;
– by clients in hotels, motels and other residential
type environments;
– bed and breakfast type environments.
The coffee maker shall not be placed in a cabinet
when in use.
No action is needed to adapt the product to 50 or
60Hz.
The product will adjust itself.
Recycle the materials with the symbol. Put the
packaging in applicable containers to recycle it. Help
protect the environment and human health and to
recycle waste of electrical and electronic appliances.
This symbol on the product indicates that this product
contains a battery which shall not be disposed with
normal household waste. This symbol on the product or
on its packaging indicates that the product may not be
treated as household waste. To recycle your product,
please take it to an official collection point or to an AEG
service center that can remove and recycle the battery
and electric parts in a safe and professional way. Follow
your country’s rules for the separate collection of
electrical products and
rechargeable batteries.
DISPOSAL
AEG reserves the right to change products, information and specifications without notice.
EN
DE
BG
ES
GR
FR
NL
PT
EN
DE
BG
ES
GR
FR
NL
PT
