Manual AEG CDP 4212 CD (page 34 of 54) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Spanish, Norwegian)

482937

Zoom out

Zoom in

1/54

English

05-CDP 4212.indd 305-CDP 4212.indd 34 03.04.2008 14:03:52 Uhr03.04.2008 14:03:52 Uhr

Intended Use

This device is used for:

• Playing back audio/MP3 CDs.

It is intended exclusively for this purpose and may only

be used as such. It may only be used in the manner

described in these instructions for use. The device must

not be used for commercial purposes.

Any other use of this device is considered to be contrary

to the intended use and may result in damage to materi-

als or even personal injury.

The  rm ETV – Elektro-Technische Vertriebsgesellschaft

mbH does not accept any liability for damage caused as a

result of the use of this device contrary to its intended use.

Commissioning the device

CD deck transport protection

• Shift the OPEN key (9) to the right to open the CD

compartment (8).

• Remove the transport protection from the CD player

if present before use.

Inserting the battery/batteries

(battery/batteries not supplied)

• Open the battery compartment (17) on the inside of

the machine.

• Insert 2 1.5V R6, AA type batteries. Match the

polarities correctly (see the inside of the battery

compartment).

• Close the battery compartment.

• A battery symbol in the display indicates that the

batteries need to be replaced.

• If the device is not used for a prolonged period,

please remove the batteries in order to avoid the

leakage of battery acid.

CAUTION:

• Di erent battery types or new and used batteries

must not be used together.

• Batteries are not to be disposed of together with

domestic wastes. Dispose of the used batteries at

the relevant collection bin or at your dealer’s.

WARNING:

Do not expose the batteries to high temperatures or

direct sunlight. Never throw batteries into the  re.

There is a danger of explosion!

Mains Operation

(power pack not supplied)

It is possible to operate the device using the mains power

unit.

1. Insert the plug of the power unit into a correctly

installed 230V, 50 Hz wall socket.

2. Connect the CD player to the power unit by inserting

the plug of the power unit into the DC 4.5 V socket (12).

3. When using a power unit (DC 4.5V/600mA) ensure

the correct polarity according to the inscriptions on

the CD player.

General Operation

HOLD (16)

This blocks the functions of all keys on the device and

is intended to protect against a key being activated

accidentally. When the switch is pushed to the right the

word ”HOLD” appears in the display.

OPEN (9)

For opening the CD compartment.

4,5 V socket (12)

For connecting to a mains adapter.

LINE-OUT (5)

For connection to a stereo system, for example.

BBS (4)

This is used to amplify the bass sounds. With the func-

tion switched on BBS appears in the display.

VOLUME (7)

This is used to control the volume.

PHONES (6)

For connecting to the headphones or earphones.

Switching o

You can turn the device o by pressing the ˾ STOP

button (3) once, or twice if the device is running.

ޥ NOTE:

If the device is not operated in stop mode, it switches

o automatically after approximately 30 seconds.

Playing CDs

1. Shift the OPEN key (9) to the right to open the CD

compartment.

2. Insert a CD with the label facing upwards and press

carefully over the button until it snaps into place.

Close the CD compartment.

3. Press the ̈II PLAY/PAUSE button (2) to switch the

device on and play back the CD. The letters „Cd“,

„ESP“ appear in the display and „MP3“  ashes. Then

the number of tracks appears brie y together with

the total running time. The CD starts from the  rst

track. The track currently being played and the time

that has elapsed are shown in the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG CDP 4212 CD in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG CDP 4212 CD Manual

Product: