Manual AEG CDP 4200 (page 25 of 40) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

546485

Zoom out

Zoom in

1/40

ENGLISH

General safety instructions

To avoid the risk of ﬁ re or an electric shock, you should

not expose the device to rain or moisture. Consequently,

do not use the device in the immediate vicinity of water

- for example near a bath tub, a swimming pool or in a

damp cellar.

Use the device only for the intended purpose.

Only connect the device at a properly installed plug

socket. Pay attention that the speciﬁ ed voltage corres-

ponds to the voltage of the plug socket.

When using external mains supply, pay attention to the

correct polarity and voltage. Always place the batteries

in the correct direction.

Assemble the device in such a way that the available

ventilation openings are not covered.

Never open the housing of the device. Incorrect repairs

can constitute a considerable risk for the user. Should

the device become damaged, in particular the mains

supply cable, do not operate the device any longer, but

rather have it repaired by an expert. Check the mains

supply cable regularly for damage.

For safety reasons a broken or damaged mains lead may

only be replaced by an equivalent lead from the manuf-

acturer, our customer service department or a similary

qualiﬁ ed person.

If the device is not used for a longer period, remove the

plug connector from the plug socket or take out the

batteries.

These symbols may be found on the machine and are

intended to indicate the following:

The lightning symbol should advise the user

of parts in the inside of the device which carry

dangerously high voltage levels.

The symbol with an exclamation mark should

advise the user of important operation or

maintenance instructions in the accompa-

nying documentation.

Devices bearing this symbol work with a

„class 1 laser“ for tracing the CD. The built-in

safety switches should prevent the user being

exposed to dangerous laser light, which is

invisible to the human eye, when the CD compartment

is opened.

Under no circumstances should these safety switches

be bypassed or manipulated, as this could result in a

danger of exposure to the laser light.

Commissioning the device

Battery Mode (not supplied)

• Open the battery compartment on the inside of the

machine

• Insert 2 1.5V AA type batteries. Match the polarities

correctly (see the inside of the battery compartment).

• If the device is not used for a long period of time, remo-

ve the batteries to avoid the „spilling“ of battery acid.

• A battery symbol in the display indicates that the bat-

teries need changing. Always change the complete

set of batteries, do not replace only one battery.

Warning: batteries are not to be disposed of together

with domestic wastes. Dispose of the used batteries at

the relevant collection bin or at your dealer’s.

Never throw batteries into the ﬁ re.

AC Adapter Mode (not supplied)

You can also use the device with an adapter.

1. Insert the AC adapter into a duly installed 230V/50Hz

protective contact outlet.

2. Connect the CD player to the AC adapter by connec-

ting the jack of the adapter into the 4.5V/DC socket.

3. When using an adapter match the polarities correctly

as indicated on the CD player.

General Operating

LINE-OUT: for connection to a stereo sys-

tem, for example.

PHONES: for connecting head- or earpho-

nes.

VOLUME: is used to set the volume of the

music.

OPEN: For opening the CD compart-

ment.

4,5 V socket: for connecting a mains adapter.

HOLD: it blocks the functions of all the

device’s keys to protect against

their accidental activation. If the

switch is pushed to the right,

the word „HOLD“ appears in the

display.

CHARGE ON/OFF: This switch is located on the

bottom of the device. The char-

ging function is activated when

connected to an external mains

line.

Make sure that there are no

batteries in the battery compart-

ment. Danger of explosion! Use

only appropriate rechargeable

batteries!

Note: In order to create the con-

tact to the battery, please use the

charging socket supplied.

Switching off

The machine is switched off by pressing the STOP

button once, or twice if one of the devices is still running.

It will also switch off automatically if not operated for

approx. 30 seconds.

5....-05-CDP 4200 AEG 25 13.04.2004, 11:09:47 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG CDP 4200 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG CDP 4200 Manual

Product: