Manual AEG CB7-1-8MTM (page 6 of 52) (English, German, Dutch, French, Portuguese, Spanish)

775139

Zoom out

Zoom in

1/52

6www.aeg.com

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and

spare parts. They have been designed especially for your product. This product is designed with the environment in

mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A. Blender base

B. Suction feet

C. ON/OFF-button

D. Mini jug

E. Blender blade

F. Blender blade base

G. Mini jug lid with ller hole

H. Measuring cup

I. Take away bottle*

J. Spill-proof drinking lid with carry handle*

K. Cooling stick*

L. Multi-chopper jar*

M. Multi-chopper blade*

N. Multi-chopper blade base*

O. Ice Crush function

P. Smoothie function

Q. Pulse function

*Certain models only

Picture page 2-4

GETTING STARTED

1 Before using your appliance for the rst time: Remove all packing material such as plastics, stickers or tags that

may be attached to the blender base, bowls or attachments.

Clean the appliance and accessories, see instructions: “Cleaning and Care”.

2 Prepare the ingredients: Rinse ingredients thoroughly. Cut the ingredients into 4 to 6 pieces and remove any hard or

large seeds. Remove any thick peel from the fruit or vegetables.

3 Place the Blender blade (E) on the top of the Blender blade base (F), and tighten the Mini jug (D) until it rmly locks

into position. Place the assembled jug on the Blender base (A) and rotate it clockwise until it locks into position. (The

jug can only be placed in one position). When locked, the symbol on the jar should be aligned with the symbol

on the blender base. Put the ingredients in the jug. (Do not exceed the maximum level as indicated on the jug.)

Caution! Always place the sealing ring around the Blender blade. Use only sealing rings provided by AEG!

4 Close the lid by aligning the lever on the lid with the handle of the jug. Insert the measuring cup.

(You can add ingredients through the ller hole. Never remove the measuring cup or the lid while running the

product.)

Caution! Never run the blender empty. When processing hot liquids, see step 5.

5 Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before lling the jug.

Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care to

protect your hands and to ventilate steam out through the ller hole. Always replace the lid before use.

6 Start the blender: Plug into mains. Press the ON/OFF-button (C), the buttons will light up. Press the 1 (Low) or 2

(High) button, to select your desired processing speed.

7 Caution! Keep hands and utensils out of the blending jug while blending.

Caution! Never run the blender empty, running the blender empty can cause overheating and damage the product.

8 You have preset speeds (1, 2), dedicated recipe programs, and Pulse mode to choose from. The selected speed or

recipe program will light up. The blender will operate until the program is nished. To stop any program manually,

press any button.

9 With Pulse you can give the ingredients a quick mix to get to your desired consistency. Press the Pulse button

(Q) to go into Pulse mode. The Pulse and the speed buttons start blinking. Press 1 (Low) or 2 (high) to pulse at dif-

ferent speeds.

10 The product comes with a variety of recipe programs. You can choose between Ice crush (O) and Smoothies (P). The

blender will stop automatically when the program is ready.

USING THE TAKE AWAY BOTTLE* (* CERTAIN MODELS ONLY)

11 Fill the ingredients in the take away bottle (I). Place the blender blade (E) on the open end of the jar and tighten

the blender blade base (F) by screwing it on the jar. Turn the take away bottle upside down. Push down the assem-

bled take away bottle onto the blender base (A) and rotate it clockwise to lock until it clicks into position. Note: When

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG CB7-1-8MTM in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5.21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG CB7-1-8MTM Manual

Product: