Manual AEG BSS 4833 (page 31 of 58) (English, German, Dutch, French, Italian, Polish, Spanish)

654073

Zoom out

Zoom in

1/58

English

3. When the battery has been fully charged, the CHARGE

indicator lamp (6) turns off.

4. Disconnect the charging cable from the speaker and PC.

5. Then close the rubberized cover again.

CAUTION:

Never leave the unit unattended when it is charging.

NOTE:

• TherechargeablebatterycanonlybechargedifthePC

is switched on.

• Donotconnectthedevicetoalaptopfortoolong,if

latter one is not connected to the mains power. Other-

wise your laptop might discharge.

• Alternatively,chargethebatteryusinga5VUSBmains

adapter (not included).

• Thechargingtimevariesaccordingtobatteryuse.

• Ifthedeviceisoutofuseforalongperiodoftime,

charge the battery at least once every 6 to 12 weeks.

The battery will also constantly discharge when

switched off.

• Whenthebatteryisalmostempty,awarningsignal

sounds at intervals.

General Operation

NOTE:

The buttons on the devices are touch controls. Lightly

touchthemwithangerinordertoexecuteafunction.

Turning the device on/off (9)

Switching on: Set the switch on the rear side to ON.

Switching off: Set the switch on the rear side to OFF.

NOTE:

Afterapprox.30minuteswithoutasignalthedeviceswill

automatically turn to standby mode. In order to use the

devices again, turn them off and on again using the switch.

Volume

Use the VOL+/VOL– buttons (5/4) to adjust the volume ac

cordingly.

NOTE:

Asignalsounds,oncethemaximumorminimumvolume

has been reached. If necessary, increase the volume on the

externalaudiosource.

Sound Settings

If necessary, change the EQ setting in your playback unit to

create the best sound.

Simultaneous operation of both speakers

(paired mode)

NOTE:

Make sure no cable is connected to the LINE IN socket.

Bluetooth will be deactivated automatically, if an audio

cable is being connected.

Connecting both speakers

The Bluetooth mode allows you to play music via both speak

ers simultaneously. That requires both speakers to be paired

ﬁrst.

1. Switch on both speakers. Both speakers emit a signal

sound and the indicator lamps (11) start ﬂashing.

2. Simultaneously press the

button (2) on one device and

the button (1) on the other device. Both speakers start

pairing.

NOTE:

• Thespeakeronwhichyouhavepressedthe but-

ton will become the “Master” device.

• Ifbothspeakershadbeenpairedpreviously,the

connection will be automatically established after

approx.4seconds.

3. Both speakers emit a bell sound, indicating that both

devices have been paired successfully.

4. The BT/LINE indicator lamp indicates the “Master” and

the “Slave” respectively.

• Flashes=Master(leftchannel)

• Ligthsupsteadily=Slave(rightchannel)

5. Thenconnectyourexternalaudioappliancetoboth

devices. Follow the instructions as provided in chapter

“Playing back music ﬁles”

“Cordless via Bluetooth”.

NOTE:

In paired mode, the control buttons of both speakers will

work simulteneously.

Changing “Master” and “Slave” assignment

As long as no audio appliance is connected to the speakers,

you can change the speaker assignments.

1. Press and hold the

button on the current “Slave” and

simultaneously press the

button on the “Master”.

2. The speakers emit a sound. The BT/LINE indicator lamps

ﬂash two times every 2 seconds.

3. The assignment of the speakers will be changed. Both

devices emit a bell sound.

4. A conﬁrmation sound indicates that the new assignment

has been successful. The BT/LINE indicator lamp on the

new “Master” starts ﬂashing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BSS 4833 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BSS 4833 Manual

Product: