Manual AEG BSS 4803 (page 31 of 58) (English, German, Dutch, French, Italian, Polish, Spanish)

546342

Zoom out

Zoom in

1/58

English

First Use of the Device/Introduction

NOTE:

• Thedeviceisoperatedprimarilywiththeremotecon-

trol. Thus the descriptions refer to the buttons on the

remote control. Some buttons are also on the device.

Buttons with the same name have the same function.

• Thebuttonsonthedevicearetouchbuttons.Touchthe

keys lightly with a ﬁnger to perform the function.

• Selectaproperplaceforthedevice.Adry,levelandslip

proof surface is suitable.

• Makesurethedeviceisventedsufciently!

• Removetheprotectivelmfromthedevice,ifpresent.

Power supply

• Insertthegridplugintoaproperlyinstalledthreeprong

socket with 230 V, 50 Hz.

• Makesurethegridvoltagecorrespondstothegureson

the rating plate.

NOTE:

Disconnect from mains power supply during longer periods

of non-use.

Insert/Replace Battery in Remote Control

• Openthebatterycompartmentontheundersideofthe

remote.

• InsertAAA/R031.5Vtypebatteries.Payattentiontothe

correct polarity (see bottom of battery compartment)!

• Closethebatterycompartment.

If the remote is not in use for a lengthy period of time, please

remove the battery to prevent the battery acid from “leaking”.

WARNING:

• Donotexposethebatteriestointenseheat,suchas

sunlight, ﬁre or similar. Danger of explosion!

• Keepbatteriesoutofthereachofchildren.Theyare

not toys.

• Donotforcebatteriesopen.

• Avoidcontactwithmetallicobjects.(Rings,nails,screws

etc.) Danger of short circuits!

• Shortcircuitsmayoverheatorevenignitebatteries.

This may lead to combustion.

• Whentransportingthebatteries,covertheterminalsfor

your safety with an adhesive strip.

• Ifabatteryleaks,donotrubtheuidintotheeyesor

the skin. If acid comes into contact with the eyes, rinse

with puriﬁed water and seek medical advice if symp-

toms persist.

CAUTION:

• Differentbatterytypesornewandusedbatteriesmay

not be used together.

• Batteriesmustnotbedisposedofinthegarbage.

Please bring used batteries to competent collection

centers or back to the dealer.

General Operation

Switch device on/off

• Withthe

button (11), you can switch the unit between

standby and operating mode. In standby, the pilot lamp

(7 on the device) lights red.

• Todisconnecttheunitcompletelyfromthemains,pull

the mains plug from the socket.

NOTE:

Keep the button (2) on the unit pressed to toggle the

unit between standby and operating mode.

Volume

By pressing the VOL+/VOL- buttons (6/3) you can adjust the

desired volume.

Infrared Remote Control

For wireless control within a distance of 5 m. If the distance

decreases you should change the batteries. For proper

operation mind a clear view between the remote control and

the sensor on the device.

Sound Settings

If necessary, change the EQ setting in your playback unit to

create the best sound.

MUTE (9)

For immediate muting of the volume. Press MUTE again to

cancel the function.

NOTE:

The activated setting is shown on the display by the “

”

symbol.

Playing back music ﬁles

You have three options to play back your own music ﬁles with

the unit: hardwired, wireless via Bluetooth, or via the USB

port.

By cable

1. Connectthe3.5mmstereoRCAcabletoanexternal

audio source. If required, use a suitable adapter (not

included).

2. Insert the other end of the cable into the AUX-IN jack

(Back Side) on the unit.

3. Repeatedly press the MODE button (2/1) until “AUX” is

shown on the display.

4. Start the playback of your audio source. Listen to the

sound playback via the speaker. You can adjust the

volume using the VOL+/VOL- buttons (6/3).

5. For the further procedure, please refer to the user manual

oftheexternalaudiosource.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BSS 4803 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BSS 4803 Manual

Product: