Manual AEG BSS 4802 (page 34 of 62) (English, German, Dutch, French, Italian, Polish, Spanish)

546344

Zoom out

Zoom in

1/62

English

First Use of the Device/Introduction

NOTE:

The buttons on the device are touch buttons. Touch the

keys lightly with a ﬁnger to perform the function.

• Selectaproperplaceforthedevice.Adry,levelandslip

proof surface is suitable.

• Makesurethedeviceisventedsufciently!

• Removetheprotectivelmfromthedevice,ifpresent.

Power supply

• Insertthegridplugintoaproperlyinstalledthreeprong

socket with 230 V, 50 Hz. Connect the device with the

plug connector by inserting its plug into the DC 12 V jack

of the device.

• Makesurethegridvoltagecorrespondstothegureson

the rating plate.

CAUTION:

• TheincludedACadaptermayonlybeusedwiththis

device. Do not use it for other devices.

• UseonlyanACadapterwith12V(

). A different

AC adapter may damage the unit.

NOTE:

• Disconnectfrommainspowersupplyduringlonger

periods of non-use.

• Thetimeandthestoredradiostationsarelostassoon

as the power supply has been interrupted.

Setting the clock (during standby mode)

1. Brieﬂy hold down the TIME/MEM button (10). The hour

indicator starts to ﬂash.

2. Use UP/DN buttons to set the hours. Conﬁrm with TIME/

MEM.

3. Use UP/DN buttons to set the minutes.

4. Press TIME/MEM again in order to save the time settings.

NOTE:

Ifnothingisenteredwithinapprox.6seconds,thedevice

reverts back to the normal display.

General Operation

Switch device on/off

• WiththeSTANDBYbutton(9),youcanswitchtheunit

between standby and operating mode. The time is

displayed in standby mode.

• Todisconnecttheunitcompletelyfromthemains,pull

the mains plug from the socket.

NOTE:

• Thetimeandthestoredradiostationsarelostassoon

as the power supply has been interrupted.

NOTE:

• After10minuteswithoutasignal,thedeviceswitches

to standby automatically.

Volume

By pressing the VOL+/VOL- buttons (5) you can adjust the

desired volume.

Sound Settings

If necessary, change the EQ setting in your playback unit to

create the best sound.

Display brightness

When the display is in standby, you can set the brightness of

the display by repeatedly pressing the SLEEP button (11).

Radio mode

Search for a radio station

1. Fully uncoil the wire antenna.

2. You have two options in order to search for a radio sta-

tion:

• AdjustthedesiredradiostationusingtheUPorDN

button (14).

• KeeptheUPorDNbuttonpresseddownforashort

while.Thedevicewillstopatthenextradiostation.

3. If the reception is too weak and there is interference on

the received station, try to improve the reception by alter-

ing the position and uncoiling or coiling the antenna.

Storing radio stations

1. Search for a radio station as described under “Search for

a radio station”.

2. Press the TIME/MEM button (10). The display will start to

ﬂash.

3. Using the UP/DN buttons (14) select the memory location

where the radio station is to be stored.

4. Press the TIME/MEM button again. The radio station will

be stored and the display will stop ﬂashing.

NOTE:

The stored radio stations are lost as soon as the power sup-

ply has been interrupted.

Select the preset radio station

You can select the stored radio sender with the ALARM/M+

and M- buttons (7/6).

Playing back music ﬁles

You have three options to play back your own music ﬁles with

the unit: hardwired, wireless via Bluetooth, or via the USB

port.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BSS 4802 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BSS 4802 Manual

Product: