Manual AEG BSS 4801 (page 27 of 46) (English, German, Dutch, French, Italian, Polish, Spanish)

546345

Zoom out

Zoom in

1/46

English

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

• Loggingondevices(Pairing)

Before you listen to music via the unit, you must pair the

devices.

1. Ensure, that the Bluetooth function is activated in

your player (e.g. mobile phone). For this, refer to the

operation manual of your player.

2. Afterturningiton,theindicatorlamp(6)willashto

show that the device is in pairing mode.

3. Keep the

button(7)presseddownforapprox.3

seconds. You will hear two beeps. The devices can

now be connected to one another.

4. Chose the Bluetooth menu in your player and

operation manual of your player. The device “AEG

BSS 4801” will show in your player as a selection.

NOTE:

Only one playback unit can be connected to the

speaker. If the speaker is already connected to

another playback unit, the speaker will not appear

in the BT selection menu.

5. Now enter the password “0000” in your player,

depending on the device manufacturers, model, and

software version.

If pairing was done successfully, you will hear a beep and the

indicator lamp (6) will light up.

For the further procedure, please refer to the user manual

of the playback unit. If possible, adjust the volume of the

externalunittoacomfortablelevel.

NOTE:

• Dependingonthedevicemanufacturer,youneedto

perform the registration (PAIRING) again to connect the

devices

• Ifyouhaveproblemsinpairingaplaybackdevice,

deactivate the WiFi function / mobile data function in

your playback device.

• TheBluetoothcompatibilitycannotbeensuredfor

devices (e.g. mobile phones) getting released in the

future.

• Toensureanoptimalconnection,makesurethatthe

battery of your player is completely charged.

• Someofthemobilephonebrandshaveanenergy-sav-

ing mode. Deactivate the energy-saving mode as it can

otherwise result in problems during the data transfer

through Bluetooth.

• Tobeabletotransferaudiodata,Bluetoothneedsto

stay activated in your player Observe the operation

manual of your player.

NOTE:

• Ifamobilephoneonwhichyouareplayingmusic

receives a call, the music will be interrupted. The sound

however is not played back via the speaker. After you

have ended the call, the devices are connected to

each other again and playback continues. The volume

increases slowly.

• Reconnecting devices

This device is designed to support automatic re-connec-

tion.

The following conditions must be met:

- the devices need to have been paired with each

other before

- Bluetooth is activated in your player

- your player supports this function

The automatic reconnection will be activated after the de-

vice has been switched on. This may last a few seconds.

If the registration has been successful, a beep will sound

and the indicator light (6) will light up.

Cleaning

CAUTION:

Do not submerge the device in water.

• Beforecleaningdisconnectfrommainspowersupply.

• Cleanthedevicewithasoftdampclothwithoutdeter-

gents.

Troubleshooting

Fault Cause Solution

Unit cannot be

operated.

Unit crashes

and “hangs”.

Disconnect from the

mains for around 5 sec-

onds. Then switch the unit

on again.

No audio signal

via the Bluetooth

connection

Speaker is not

paired to the

audio source.

Check whether a connec-

tionexists.Ifnecessary,

pair the speaker again to

the audio source.

Volume too

low

Increase the volume on

the speaker

Increase the volume on

the audio source.

Audio cable is

connected

Remove the cable from

the AUX IN socket (2).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BSS 4801 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 9,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BSS 4801 Manual

Product: