551890
46
Zoom out
Zoom in
Previous page
1/52
Next page
To clean metal surfaces, use a usual
cleaning agent.
Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
Clean stubborn dirt with a special
oven cleaner.
Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.
12.1 Steam Cleaning
1.
Remove as much dirt as possible
manually.
CAUTION!
For a better performance you
should start the Steam Cleaning
function when the appliance is
cool. Check the residual heat.
Remove the shelf support to
clean the side walls.
2.
Put 400 ml of water mixed with 3 ta-
blespoons of vinegar directly into
the steam generator.
3.
Activate the Steam Cleaning func-
tion in the main menu. The duration
of the function is approximately 33
minutes.
4.
An acoustic signal sounds when the
programme is completed. Touch the
sensor field to deactivate the signal.
5.
Wipe the internal surface of the ap-
pliance with a soft sponge. You can
use warm water from the steam gen-
erator.
Do not use the sponge provided
with the appliance.
6.
Remove the remaining water from
the steam generator.
7.
After cleaning keep the appliance
door open for approximately 1 hour.
Wait until the appliance is dry.
You can get maximum effects of
the Steam Cleaning function if
you manually clean the appliance
immediately after the Steam
Cleaning function ends.
When the Steam Cleaning func-
tion is active, the lamp is off.
Always use the Steam Cleaning
function after cooking with
steam.
Use the Steam Cleaning function
two times if the level of dirt is
high. Make sure that the appli-
ance is cool before you activate
the second cycle.
12.2 Shelf supports
You can remove the shelf supports to
clean the side walls before activating the
Steam Cleaning function.
Removing the shelf supports
2
3
1
1.
Carefully pull the supports up and
out of the front catch.
2.
Lightly move the supports on the
front catch inwards.
3.
Pull the supports out of the rear
catch.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
12.3 Decalcification of the
Steam generator
1.
Put 250 ml of water mixed with 3 ta-
blespoons of vinegar directly into
the steam generator.
2.
Activate the Decalcification function
in the Assisted Cleaning menu. The
46
www.aeg.com
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BS9354151M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BS9354151M in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG BS9354151M

AEG BS9354151M User Manual - German - 56 pages

AEG BS9354151M User Manual - Dutch - 52 pages

AEG BS9354151M User Manual - French - 56 pages

AEG BS9354151M User Manual - Italian - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info