526956
48
Zoom out
Zoom in
Previous page
1/56
Next page
To clean the appliance, remove the shelf
supports.
1. Pull carefully the supports up and out
of the front catch.
2
3
1
2.
Pull the front end of the shelf support
away from the side wall.
3. Pull the supports out of the rear
catch.
Install the shelf supports in the opposite
sequence.
12.3 Steam Cleaning
Remove as much dirt as possible
manually.
Clean the inner door glass with a soft
cloth with warm water and a cleaning
agent.
Remove the shelf support to clean the
side walls.
CAUTION!
For a better performance
you should start the cleaning
function when the appliance
is cool. Check the residual
heat.
Always use the function after cooking
with steam.
When the function is active, the lamp is
off.
1. Put 400 ml of water mixed with 3
tablespoons of vinegar (without
herbs) directly into the steam
generator.
2. In the menu choose: Assisted
Cleaning.
3. Activate the function: Steam
Cleaning.
The display shows the duration of the
function (33 minutes).
An acoustic signal sounds when the
programme is completed.
4. Touch a sensor field to deactivate
the signal.
5. Wipe the internal surface of the
appliance with a soft sponge.
6. Remove the remaining water from
the steam generator.
7. After cleaning keep the appliance
door open for approximately 1 hour.
Wait until the appliance is dry. To
speed up the drying you can heat up
the appliance with hot air at
temperature 150 °C for
approximately 15 minutes.
You can get maximum effects of the
cleaning function if you manually clean
the appliance immediately after the
function ends.
Use the function two times if the level of
dirt is high. Make sure that the appliance
is cool before you activate the second
cycle.
12.4 Decalcification of the
Steam generator
1. Put 250 ml of water mixed with 3
tablespoons of vinegar directly into
the steam generator.
2. In the menu choose: Assisted
Cleaning.
3. Activate the function: Decalcification.
The display shows the duration of the
function (15 minutes).
An acoustic signal sounds when the
programme is completed.
4. Touch a sensor field to deactivate
the signal.
5. Remove the remaining water from
the steam generator.
6. Keep the door open for
approximately 1 hour to let the
appliance dry fully. To speed up the
drying you can heat up the appliance
with hot air at temperature 150 °C for
approximately 15 minutes.
www.aeg.com
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BS9354001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BS9354001 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG BS9354001

AEG BS9354001 Quick start guide - German - 4 pages

AEG BS9354001 User Manual - German - 56 pages

AEG BS9354001 User Manual - Dutch - 56 pages

AEG BS9354001 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info